EUVIMEDEUVIMED entdecken
Crossref

Fabrication of High-Strength, Highly Transparent and Reprocessable Bio-Based Itaconate Polymeric Glass via Constructing a Dual Dynamic Cross-Linked Network

Yuhang Peng, Yiping Chen, Songfeng Yang, Liqun Zhang, Yue Yu, Hui Yang, Haijun Ji, Runguo Wang

ACS Applied Polymer Materials · 14.08.2026 · 8 (15) · 12355-12366

DOI: 10.1021/acsapm.6c01395 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Polymer Materials, online erschienen am 05.08.2026. Verfasst von Yuhang Peng und 7 weiteren Autor:innen. Die Arbeit nennt 67 Literaturangaben. Gefördert von: National Natural Science Foundation of China (NSFC).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conventional plastics are widely used, but they rely on nonrenewable petrochemical feedstocks. Although existing biobased plastics are derived from sustainable sources, their performance is often inferior to that of petroleum-based plastics. Introducing cross-linked networks can improve the mechanical properties of biobased plastics, but it also renders them nonrecyclable, thereby undermining their sustainability. Therefore, inexpensive biobased dimethyl itaconate was used to prepare biobased itaconate organic glass, and a dual dynamic cross-linked network (hydrogen bonds/hindered urea bonds) was constructed by introducing dynamic hindered urea bonds into the system. This structure not only achieves simultaneous strengthening and toughening of the biobased plastic, but also overcomes challenges in existing studies, such as the difficulty of balancing mechanical strength and transparency, high preparation costs, and poor recyclability. This material exhibited excellent properties: a maximum tensile strength of 33.5 MPa and an elongation at break of 13.9%, representing an increase of 782% in tensile strength and 1831% in elongation at break compared with the sample without dynamic urea bonds. The visible light transmittance exceeds 90%. After one reprocessing cycle, approximately 70% of the mechanical strength and more than 90% of the optical performance were retained, outperforming most existing recyclable biobased plastics. This work provides a feasible strategy for the design of high-performance biobased polymers integrating “function, strength, and recyclability”.

Förderung

  • National Natural Science Foundation of China (NSFC)

Zitieren

APA

Peng, Y., Chen, Y., Yang, S., Zhang, L., Yu, Y., Yang, H., Ji, H., & Wang, R. (2026). Fabrication of High-Strength, Highly Transparent and Reprocessable Bio-Based Itaconate Polymeric Glass via Constructing a Dual Dynamic Cross-Linked Network. ACS Applied Polymer Materials, 8(15), 12355-12366. https://doi.org/10.1021/acsapm.6c01395

Vancouver

Peng Y, Chen Y, Yang S, Zhang L, Yu Y, Yang H, et al. Fabrication of High-Strength, Highly Transparent and Reprocessable Bio-Based Itaconate Polymeric Glass via Constructing a Dual Dynamic Cross-Linked Network. ACS Applied Polymer Materials. 2026;8(15):12355-12366. doi:10.1021/acsapm.6c01395

BibTeX
@article{Peng2026,
  author = {Peng, Yuhang and Chen, Yiping and Yang, Songfeng and Zhang, Liqun and Yu, Yue and Yang, Hui and Ji, Haijun and Wang, Runguo},
  title = {Fabrication of High-Strength, Highly Transparent and Reprocessable Bio-Based Itaconate Polymeric Glass via Constructing a Dual Dynamic Cross-Linked Network},
  journal = {ACS Applied Polymer Materials},
  year = {2026},
  volume = {8},
  number = {15},
  pages = {12355--12366},
  doi = {10.1021/acsapm.6c01395}
}
Kostenlos starten →