EUVIMEDEUVIMED entdecken
Crossref

Poplar Wood Modification Using Hyperbranched Epoxy Resin/2D Resin

Qudan Yang, Xueying Liu, Ruiwen Yu, Wenbo Liu, Luhua Zhang, Chunfeng Li, Mingli Liu

ACS Applied Polymer Materials · 14.08.2026 · 8 (15) · 12323-12334

DOI: 10.1021/acsapm.6c01340 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Polymer Materials, online erschienen am 15.07.2026. Verfasst von Qudan Yang und 6 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Gefördert von: National Natural Science Foundation of China (NSFC).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the limitations of poplar wood, including insufficient toughness and flammability, this study used hyperbranched epoxy resin (HBEP) and low-formaldehyde dimethylol dihydroxyethylene (2D) urea resin to construct a composite impregnation (HBEP/2D) system. Through the full-cell process, the HBEP/2D composite impregnation solution underwent in situ curing and cross-linking within the wood structure, thereby enhancing its physicomechanical properties. Using ultrasonic blending, a homogeneous and stable HBEP/2D composite impregnation solution was developed. Impact toughness was used as the evaluation criterion to investigate the optimal impregnation process. The effect of the modification process on the physical and mechanical properties of the modified sample was analyzed. Under the optimum impregnation process, thermogravimetric analyzer (TG) analysis indicated that the temperature corresponding to the maximum pyrolysis rate increased from 336.4 to 349.9 °C, and the char yield increased from 14.82 to 23.83%. Modulus of rupture (MOR), modulus of elasticity (MOE), and impact toughness of the modified sample (145.46 MPa, 19.10 GPa, and 69.35 kJ/m2) were increased by 69.14, 78.34, and 38.70%, respectively, compared to the control sample. This study prepared modified samples with improved dimensional stability and mechanical strength, indicating the potential of wood materials for use in residential decoration and engineering applications.

Förderung

  • National Natural Science Foundation of China (NSFC)

Zitieren

APA

Yang, Q., Liu, X., Yu, R., Liu, W., Zhang, L., Li, C., & Liu, M. (2026). Poplar Wood Modification Using Hyperbranched Epoxy Resin/2D Resin. ACS Applied Polymer Materials, 8(15), 12323-12334. https://doi.org/10.1021/acsapm.6c01340

Vancouver

Yang Q, Liu X, Yu R, Liu W, Zhang L, Li C, et al. Poplar Wood Modification Using Hyperbranched Epoxy Resin/2D Resin. ACS Applied Polymer Materials. 2026;8(15):12323-12334. doi:10.1021/acsapm.6c01340

BibTeX
@article{Yang2026,
  author = {Yang, Qudan and Liu, Xueying and Yu, Ruiwen and Liu, Wenbo and Zhang, Luhua and Li, Chunfeng and Liu, Mingli},
  title = {Poplar Wood Modification Using Hyperbranched Epoxy Resin/2D Resin},
  journal = {ACS Applied Polymer Materials},
  year = {2026},
  volume = {8},
  number = {15},
  pages = {12323--12334},
  doi = {10.1021/acsapm.6c01340}
}
Kostenlos starten →