EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polyaniline-Based Cationic Porous Organic Polymers for Fast and Efficient Anion-Exchange-Driven Capture of Cr 2 O 7 2–

Long Pan, Zilu Liu, Marcos Villeda Hernandez, Bob C Schroeder iD, Yuchen Sun iD, Charl F J Faul

ACS Applied Polymer Materials · 14.06.2024 · 6 (11) · 6416-6424

DOI: 10.1021/acsapm.4c00658 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Polymer Materials, online erschienen am 24.05.2024. Verfasst von Long Pan und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemistry, University of Bristol, Bristol, England BS8 1TS, U.K. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Royal Society, UK Research and Innovation, Consejo Nacional de Ciencia y Tecnología.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Efficient treatment of wastewater contaminated with carcinogenic Cr(VI) has been a long-term challenge for both academic and industrial research efforts. Removal of Cr(VI) species by ion exchange is a relatively simple and efficient method, and its combination with highly tailorable nanomaterials is promising for the treatment of such wastewater. Here, we report a type of cationic porous organic polymer (POP), namely, PTPA-PIP, which can be prepared simply by converting the corresponding aromatic polyamine PTPA to its protonated form, thereby significantly increasing its hydrophilicity and ability to disperse homogeneously in water, crucial for application in water treatment. In addition to detailed characterization of the physicochemical properties of PTPA-PIP (including using Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), and solid-state NMR techniques), adsorption experiments demonstrate that PTPA-PIP removes low-concentration dichromate anions with very high performance, including excellent exchange capacity (maximum capacity of 230 mg Cr2O7 2-/g PTPA-PIP), ultrafast removal (initial adsorption rate of 83 mg g-1 min-1), excellent selectivity (∼10% loss of adsorption capacity in the presence of 40-fold concentration of competing anions), as well as superior reusability (reusable for at least 5 cycles without compromised performance). These results demonstrate that PTPA-PIP is an outstanding candidate for application in industrial settings for the effective removal of harmful Cr(VI) pollutants in wastewater.

Autor:innen und Institutionen

  • School of Chemistry, University of Bristol, Bristol, England BS8 1TS, U.K.
  • Institute for Advanced Pharmaceutical Materials, Asymchem Life Sciences (Tianjin) Co., Ltd., No.265 South Avenue, TEDA, Tianjin 300462, P. R. China.
  • Department of Chemistry, University College London, London WC1H 0AJ, U.K.

ORCID-Profile: Bob C Schroeder, Yuchen Sun

Förderung

  • Royal Society
  • UK Research and Innovation
  • Consejo Nacional de Ciencia y Tecnología
  • China Scholarship Council

Zitieren

APA

Pan, L., Liu, Z., Hernandez, M. V., Schroeder, B. C., Sun, Y., & Faul, C. F. J. (2024). Polyaniline-Based Cationic Porous Organic Polymers for Fast and Efficient Anion-Exchange-Driven Capture of Cr 2 O 7 2–. ACS Applied Polymer Materials, 6(11), 6416-6424. https://doi.org/10.1021/acsapm.4c00658

Vancouver

Pan L, Liu Z, Hernandez MV, Schroeder BC, Sun Y, Faul CFJ. Polyaniline-Based Cationic Porous Organic Polymers for Fast and Efficient Anion-Exchange-Driven Capture of Cr 2 O 7 2–. ACS Applied Polymer Materials. 2024;6(11):6416-6424. doi:10.1021/acsapm.4c00658

BibTeX
@article{Pan2024,
  author = {Pan, Long and Liu, Zilu and Hernandez, Marcos Villeda and Schroeder, Bob C and Sun, Yuchen and Faul, Charl F J},
  title = {Polyaniline-Based Cationic Porous Organic Polymers for Fast and Efficient Anion-Exchange-Driven Capture of Cr 2 O 7 2–},
  journal = {ACS Applied Polymer Materials},
  year = {2024},
  volume = {6},
  number = {11},
  pages = {6416--6424},
  doi = {10.1021/acsapm.4c00658}
}
Kostenlos starten →