EUVIMEDEUVIMED entdecken
Crossref

Structural and Photoluminescence Properties of Ba3Y1– z Lu z Al2O7.5: Bi3+/Bi3+,Eu3+ Phosphors for WLEDs Applications

Junwen Huang, Qinglong He, Xi Li, Dixi Ke, Gen Li, Han Zhang, Junlong Liu, Min Zeng, Yuebin Li

ACS Applied Optical Materials · 11.11.2026

DOI: 10.1021/acsaom.6c00577 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Optical Materials, online erschienen am 11.11.2026. Verfasst von Junwen Huang und 8 weiteren Autor:innen. Die Arbeit nennt 63 Literaturangaben. Gefördert von: Key Laboratory for the Synthesis and Application of Organic Functional Molecules, Ministry of Education, Hubei Provincial Department of Education, State Key Laboratory of Advanced Glass Materials.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bi3+-doped and Bi3+/Eu3+-codoped Ba3Y1–zLuzAl2O7.5 phosphors with different compositions were prepared via a high-temperature solid-state route, followed by systematic evaluation of their crystal structure, luminescence characteristics, energy transfer process, and temperature-dependent emission behavior. Under 323 nm near-ultraviolet excitation, Ba3YAl2O7.5: Bi3+ exhibits a broad yellow emission centered at 555 nm. Upon Eu3+ codoping, characteristic orange-red Eu3+ emission is introduced, producing a broad emission band spanning approximately 550–750 nm. Spectral overlap and fluorescence lifetime measurements confirm energy transfer from Bi3+ to Eu3+, with a maximum transfer efficiency of 35.66% at 7% Eu3+. Partial substitution of Y3+ by Lu3+ provides effective regulation of the local crystal environment. With increasing Lu3+ content, the Bi3+ emission peak gradually red-shifts from 555 to 577 nm, accompanied by improved thermal stability. For the optimized Ba3Y0.5Lu0.5Al2O7.5:2% Bi3+,3% Eu3+ phosphor, the Bi3+ and Eu3+ emission intensities retain 76% and 72% of their room-temperature values at 423 K, respectively. By combining the optimized phosphor with a commercial blue-emitting phosphor and a near-ultraviolet LED chip, a WLED was constructed, delivering an Ra value of 87 and a CCT of 4822 K. Moreover, the device maintains a largely unchanged spectral profile from 300 to 425 K. These results demonstrate that the combined Bi3+→Eu3+ energy transfer and Lu3+-substitution strategies provide an effective route for color tuning and thermal-stability improvement in phosphors for high-quality white-light applications.

Förderung

  • Key Laboratory for the Synthesis and Application of Organic Functional Molecules, Ministry of Education
  • Hubei Provincial Department of Education
  • State Key Laboratory of Advanced Glass Materials
  • Hubei Optical Fundamental Research Center
  • National Natural Science Foundation of China (NSFC)
  • Jingzhou City

Zitieren

APA

Huang, J., He, Q., Li, X., Ke, D., Li, G., Zhang, H., Liu, J., Zeng, M., & Li, Y. (2026). Structural and Photoluminescence Properties of Ba3Y1– z Lu z Al2O7.5: Bi3+/Bi3+,Eu3+ Phosphors for WLEDs Applications. ACS Applied Optical Materials. https://doi.org/10.1021/acsaom.6c00577

Vancouver

Huang J, He Q, Li X, Ke D, Li G, Zhang H, et al. Structural and Photoluminescence Properties of Ba3Y1– z Lu z Al2O7.5: Bi3+/Bi3+,Eu3+ Phosphors for WLEDs Applications. ACS Applied Optical Materials. 2026. doi:10.1021/acsaom.6c00577

BibTeX
@article{Huang2026,
  author = {Huang, Junwen and He, Qinglong and Li, Xi and Ke, Dixi and Li, Gen and Zhang, Han and Liu, Junlong and Zeng, Min and Li, Yuebin},
  title = {Structural and Photoluminescence Properties of Ba3Y1– z Lu z Al2O7.5: Bi3+/Bi3+,Eu3+ Phosphors for WLEDs Applications},
  journal = {ACS Applied Optical Materials},
  year = {2026},
  doi = {10.1021/acsaom.6c00577}
}
Kostenlos starten →