EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

SiO2-Crosslinked Molecularly Imprinted Hybrid Nanostructures for Solid-Phase Extraction of Bisphenol A

Kae-Zheng Chin, Bing-Yi Chen, Chung-Hui Weng, Hung-Hua Chen, Sue-min Chang, Hsin-hsin Tung

ACS Applied Nano Materials · 05.11.2026

DOI: 10.1021/acsanm.6c05028 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Nano Materials, online erschienen am 05.11.2026. Verfasst von Kae-Zheng Chin und 5 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Yang Ming Chiao Tung University, Ministry of Science and Technology, Taiwan, National Science and Technology Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Previously, a molecularly imprinted hybrid (MIH) was synthesized by imprinting bisphenol A (BPA) within SiO2-crosslinked poly(styrene-co-methyl methacrylate) nanoframeworks. In this work, its adsorption and solid-phase extraction (SPE) performance toward BPA in complex matrices was systematically investigated and compared with two commercial sorbents, C18 and SupelMIPBPA. MIH exhibited a high adsorption capacity of 49.5 mg/g with a large Langmuir coefficient (KL = 3.16 × 10−2 L/mg) and high BPA selectivity with factors of 1.53 and 35.4 relative to 2BPF and phenol, respectively. Moreover, it exhibited 12 and 1120 times higher specific adsorption ability than SupelMIPBPA and C18, respectively. The tailored binding sites embedded within the hydrophobic polymeric matrix and stabilized with rigid, hydrophilic SiO2 crosslinks contributed to stable adsorption over pH 2−9 and in the presence of humic acid up to 20 mg/L while enhancing BPA adsorption by 1.5-fold at NaCl concentrations up to 3000 mM. MIH maintained stable adsorption over 11 regeneration cycles across synthesis batches and retained its adsorption capacity after more than six months of storage. When applied to SPE, the optimized MIH-SPE method effectively enriched BPA while reducing matrix interference, achieving enrichment factors of 52.0−60.0. Coupled with HPLC-photodiode array detection, the method achieved matrix-specific MDLs of 1.3 ng/mL in DI water and 0.2−3.1 ng/mL in environmental waters. Recoveries of 88.8−118.7% and RSDs of 0.2−9.6% demonstrated satisfactory accuracy and precision across the tested water matrices. In contrast, C18- and SupelMIPBPA-based SPE exhibited inferior performance due to limited adsorption capacity or less efficient analyte elution.

Förderung

  • National Yang Ming Chiao Tung University
  • Ministry of Science and Technology, Taiwan
  • National Science and Technology Council
  • Ministry of Education - Taiwan

Zitieren

APA

Chin, K., Chen, B., Weng, C., Chen, H., Chang, S., & Tung, H. (2026). SiO2-Crosslinked Molecularly Imprinted Hybrid Nanostructures for Solid-Phase Extraction of Bisphenol A. ACS Applied Nano Materials. https://doi.org/10.1021/acsanm.6c05028

Vancouver

Chin K, Chen B, Weng C, Chen H, Chang S, Tung H. SiO2-Crosslinked Molecularly Imprinted Hybrid Nanostructures for Solid-Phase Extraction of Bisphenol A. ACS Applied Nano Materials. 2026. doi:10.1021/acsanm.6c05028

BibTeX
@article{Chin2026,
  author = {Chin, Kae-Zheng and Chen, Bing-Yi and Weng, Chung-Hui and Chen, Hung-Hua and Chang, Sue-min and Tung, Hsin-hsin},
  title = {SiO2-Crosslinked Molecularly Imprinted Hybrid Nanostructures for Solid-Phase Extraction of Bisphenol A},
  journal = {ACS Applied Nano Materials},
  year = {2026},
  doi = {10.1021/acsanm.6c05028}
}
Kostenlos starten →