EUVIMEDEUVIMED entdecken
Crossref

Mechanical Durability of Bactericidal Cyclo-Olefin Polymer Based Nanopillar Surfaces after Point-Contact Wear

Haruya Kawashima, Zihao Zhao, Kensei Ichiba, Tomohiro Shimizu, Takeshi Ito

ACS Applied Nano Materials · 19.11.2026

DOI: 10.1021/acsanm.6c04204 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Nano Materials, online erschienen am 19.11.2026. Verfasst von Haruya Kawashima und 4 weiteren Autor:innen. Die Arbeit nennt 54 Literaturangaben. Gefördert von: JSPS KAKENHI.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biomimetic nanopillar surfaces have attracted attention for their ability to induce bacterial cell death through physical damage to bacterial cells. However, the mechanical durability of polymeric nanopillar surfaces and their bactericidal performance after wear remain insufficiently understood. In this study, cyclo-olefin polymer (COP) nanopillar surfaces with nominal heights of 100, 200, and 300 nm were fabricated to investigate the effects of point-contact wear on surface morphology and bactericidal performance. Friction and wear tests were performed using a nylon ball under a normal load of 0.49 N for 100 sliding cycles. The nanopillar surfaces exhibited lower dynamic friction coefficients than flat COP, with no clear dependence on nanopillar height. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) observations revealed nanopillar tilting, tip deformation, and height reductions of approximately 57−70% after wear. Despite these morphological changes, the viable cell ratios of Escherichia coli on the nanopillar surfaces remained 10.0−12.8% after wear. The value was substantially lower than on worn flat COP (67.4%). These findings indicate that COP nanopillar surfaces can maintain low viable cell ratios after substantial wear-induced morphological changes, highlighting the importance of evaluating both mechanical durability and bactericidal performance for practical applications.

Förderung

  • JSPS KAKENHI

Zitieren

APA

Kawashima, H., Zhao, Z., Ichiba, K., Shimizu, T., & Ito, T. (2026). Mechanical Durability of Bactericidal Cyclo-Olefin Polymer Based Nanopillar Surfaces after Point-Contact Wear. ACS Applied Nano Materials. https://doi.org/10.1021/acsanm.6c04204

Vancouver

Kawashima H, Zhao Z, Ichiba K, Shimizu T, Ito T. Mechanical Durability of Bactericidal Cyclo-Olefin Polymer Based Nanopillar Surfaces after Point-Contact Wear. ACS Applied Nano Materials. 2026. doi:10.1021/acsanm.6c04204

BibTeX
@article{Kawashima2026,
  author = {Kawashima, Haruya and Zhao, Zihao and Ichiba, Kensei and Shimizu, Tomohiro and Ito, Takeshi},
  title = {Mechanical Durability of Bactericidal Cyclo-Olefin Polymer Based Nanopillar Surfaces after Point-Contact Wear},
  journal = {ACS Applied Nano Materials},
  year = {2026},
  doi = {10.1021/acsanm.6c04204}
}
Kostenlos starten →