High-Performance MEMS-Based Sensor for Trace H2S Detection Enabled by Pd–In2O3 Nanorods
ACS Applied Nano Materials · 31.07.2026 · 9 (30) · 14188-14198
DOI: 10.1021/acsanm.6c01618 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Nano Materials, online erschienen am 16.07.2026. Verfasst von Changkun Qiu und 7 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Gefördert von: National Basic Research Program of China, NSFC.
Abstract (Originalsprache)
Hydrogen sulfide (H2S), a highly toxic and corrosive gas, requires highly sensitive, selective, rapid, and stable trace-level detection in various industrial settings. To address the limitations of conventional metal oxide-based H2S sensors─such as insufficient detection limits, poor selectivity, and inadequate long-term stability─this study developed an H2S sensor by integrating Pd-loaded In2O3 nanomaterials with microelectro-mechanical systems (MEMS) technology. A Pd–In2O3 composite with a one-dimensional nanorod structure was successfully synthesized via a hydrothermal method followed by thermal treatment. Systematic characterization confirmed that Pd nanoparticles are uniformly dispersed on the In2O3 surface in the metallic state. When fabricated into a MEMS-based sensor, the composite exhibited excellent overall performance at near-ambient temperature (25 ± 2 °C): a detection limit as low as 50 ppb, response and recovery times of 8 and 13 s, respectively, a selectivity ratio ≥5 (response to H2S compared to interfering gases such as CO, H2, and CH4), and less than 3% fluctuation in repeated tests. Theoretical calculations revealed that the adsorption energy of H2S on Pd–In2O3 (−0.787 eV) is more negative than that on pristine In2O3 (−0.679 eV), accompanied by a greater charge transfer (0.124 |e| vs 0.086 |e| for pristine In2O3). Mechanistic analysis indicated that Pd doping not only modulates the band structure of In2O3 via an electronic doping effect (forming a Schottky junction) but also acts as catalytic active sites, preferentially promoting the surface oxidation of H2S. The synergistic effect of enhanced adsorption affinity, accelerated charge transfer (verified by theoretical calculations), and selective catalysis significantly improves the sensor’s sensitivity, selectivity, and response speed. This work provides an effective strategy for material design and device implementation in developing high-performance, low-power, and easily integrable trace H2S sensors.
Förderung
- National Basic Research Program of China
- NSFC
Zitieren
APA
Qiu, C., Zhu, L., Li, Q., Wang, H., An, F., Wang, S., Fan, C., & Yang, Z. (2026). High-Performance MEMS-Based Sensor for Trace H2S Detection Enabled by Pd–In2O3 Nanorods. ACS Applied Nano Materials, 9(30), 14188-14198. https://doi.org/10.1021/acsanm.6c01618
Vancouver
Qiu C, Zhu L, Li Q, Wang H, An F, Wang S, et al. High-Performance MEMS-Based Sensor for Trace H2S Detection Enabled by Pd–In2O3 Nanorods. ACS Applied Nano Materials. 2026;9(30):14188-14198. doi:10.1021/acsanm.6c01618
BibTeX
@article{Qiu2026,
author = {Qiu, Changkun and Zhu, Liang and Li, Qingrun and Wang, Haozhi and An, Fei and Wang, Shiqiang and Fan, Chao and Yang, Zhe},
title = {High-Performance MEMS-Based Sensor for Trace H2S Detection Enabled by Pd–In2O3 Nanorods},
journal = {ACS Applied Nano Materials},
year = {2026},
volume = {9},
number = {30},
pages = {14188--14198},
doi = {10.1021/acsanm.6c01618}
}
EUVIMED