Different Roles of Surface Chemistry and Roughness of Laser-Induced Graphene: Implications for Tunable Wettability
ACS Applied Nano Materials · 22.09.2023 · 6 (18) · 16201-16211
DOI: 10.1021/acsanm.3c02066 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Nano Materials, online erschienen am 10.07.2023. Verfasst von Alexander Dallinger und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Solid State Physics, NAWI Graz, Graz University of Technology, 8010 Graz, Austria. Die Arbeit wurde bisher 65-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: H2020 Future and Emerging Technologies, Technische Universität Graz.
Abstract (Originalsprache)
The control of surface wettability is a technological key aspect and usually poses considerable challenges connected to high cost, nanostructure, and durability, especially when aiming at surface patterning with high and extreme wettability contrast. This work shows a simple and scalable approach by using laser-induced graphene (LIG) and a locally inert atmosphere to continuously tune the wettability of a polyimide/LIG surface from hydrophilic to superhydrophobic (Φ ∼ 160°). This is related to the reduced amount of oxygen on the LIG surface, influenced by the local atmosphere. Furthermore, the influence of the roughness pattern of LIG on the wettability is investigated. Both approaches are combined, and the influence of surface chemistry and roughness is discussed. Measurements of the roll-off angle show that LIG scribed in an inert atmosphere with a low roughness has the highest droplet mobility with a roll-off angle of ΦRO = (1.7 ± 0.3)°. The superhydrophobic properties of the samples were maintained for over a year and showed no degradation after multiple uses. Applications of surfaces with extreme wettability contrast in millifluidics and fog basking are demonstrated. Overall, the proposed processing allows for the continuous tuning and patterning of the surface properties of LIG in a very accessible fashion useful for "lab-on-chip" applications.
Autor:innen und Institutionen
- Institute of Solid State Physics, NAWI Graz, Graz University of Technology, 8010 Graz, Austria.
- The Biorobotics Institute, Scuola Superiore Sant'Anna, Viale R. Piaggio 34, 56025 Pontedera, Italy.
- Department of Excellence in Robotics & AI, Scuola Superiore Sant'Anna, Piazza Martiri della Libertà 33, 56127 Pisa, Italy.
- Interdisciplinary Center on Sustainability and Climate, Scuola Superiore Sant'Anna, Piazza Martiri della Libertà 33, 56127 Pisa, Italy.
ORCID-Profile: Alexander Dallinger, Francesco Greco
Förderung
- H2020 Future and Emerging Technologies
- Technische Universität Graz
Zitieren
APA
Dallinger, A., Steinwender, F., Gritzner, M., & Greco, F. (2023). Different Roles of Surface Chemistry and Roughness of Laser-Induced Graphene: Implications for Tunable Wettability. ACS Applied Nano Materials, 6(18), 16201-16211. https://doi.org/10.1021/acsanm.3c02066
Vancouver
Dallinger A, Steinwender F, Gritzner M, Greco F. Different Roles of Surface Chemistry and Roughness of Laser-Induced Graphene: Implications for Tunable Wettability. ACS Applied Nano Materials. 2023;6(18):16201-16211. doi:10.1021/acsanm.3c02066
BibTeX
@article{Dallinger2023,
author = {Dallinger, Alexander and Steinwender, Felix and Gritzner, Matthias and Greco, Francesco},
title = {Different Roles of Surface Chemistry and Roughness of Laser-Induced Graphene: Implications for Tunable Wettability},
journal = {ACS Applied Nano Materials},
year = {2023},
volume = {6},
number = {18},
pages = {16201--16211},
doi = {10.1021/acsanm.3c02066}
}
EUVIMED