Stable Magnesium Negative Electrodes Achieved via Dy Microalloying for Rechargeable Magnesium Batteries
ACS Applied Materials & Interfaces · 13.11.2026
DOI: 10.1021/acsami.6c22070 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 13.11.2026. Verfasst von Chao Chen und 9 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, National Engineering Research Center for Magnesium Alloys, National Innovation Center for Industry-Educ…. Die Arbeit nennt 51 Literaturangaben. Gefördert von: National Natural Science Foundation of China, China Association for Science and Technology, Chongqing Technology Innovation and Application Development Project.
Abstract (Originalsprache)
Rechargeable magnesium batteries (RMBs) are a promising alternative technology to lithium-ion batteries owing to the abundant resources, high theoretical volumetric energy density, and relatively high safety. Nevertheless, the nonuniform deposition/dissolution behavior, interfacial passivation, and exacerbated polarization under high current densities of magnesium metal negative electrodes severely impede their practical implementation. In this study, we propose a Dy microalloying strategy to regulate the microstructure and deposition/dissolution behavior of the magnesium negative electrode. The incorporation of low-concentration Dy (0.7 wt %) induces grain refinement and crystal texture evolution and alleviates galvanic corrosion due to the similar electrode potentials of Dy and Mg. This synergistic effect enhances the electrochemical reaction kinetics, structural integrity, and interfacial stability, thereby improving the uniformity of Mg deposition/dissolution. Therefore, the Mg–0.7Dy alloy negative electrode achieves a long cycle life exceeding 2500 h in symmetric cells at 1 mA cm–2 and 1 mA h cm–2. Moreover, the Mg–0.7Dy∥Mo6S8 full cell maintains a specific capacity of 59.67 mA h g–1 after 4000 cycles at 5 C, corresponding to a high capacity retention of 93.84%. This work demonstrates the feasibility of regulating the microstructure and deposition/dissolution behavior of the magnesium negative electrode through Dy microalloying engineering, offering a feasible strategy for developing high-performance negative electrodes for RMBs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Materials Science and Engineering, National Engineering Research Center for Magnesium Alloys, National Innovation Center for Industry-Education Integration of Energy Storage Technology, Chongqing University,…
- Institute of New Energy Storage Materials and Equipment, Mingyue Lake Laboratory, Chongqing401135, China.
ORCID-Profile: Guangsheng Huang, Jili Yue, Fangyu Xiong
Förderung
- National Natural Science Foundation of China
- China Association for Science and Technology
- Chongqing Technology Innovation and Application Development Project
Zitieren
APA
Chen, C., Zhang, Y., Wang, Q., Gao, Z., Wu, J., Wang, W., Deng, Y., Huang, G., Yue, J., & Xiong, F. (2026). Stable Magnesium Negative Electrodes Achieved via Dy Microalloying for Rechargeable Magnesium Batteries. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c22070
Vancouver
Chen C, Zhang Y, Wang Q, Gao Z, Wu J, Wang W, et al. Stable Magnesium Negative Electrodes Achieved via Dy Microalloying for Rechargeable Magnesium Batteries. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c22070
BibTeX
@article{Chen2026,
author = {Chen, Chao and Zhang, Yafei and Wang, Qingmeng and Gao, Zhipeng and Wu, Junhan and Wang, Weizhang and Deng, Yujie and Huang, Guangsheng and Yue, Jili and Xiong, Fangyu},
title = {Stable Magnesium Negative Electrodes Achieved via Dy Microalloying for Rechargeable Magnesium Batteries},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
doi = {10.1021/acsami.6c22070}
}
EUVIMED