EUVIMEDEUVIMED entdecken
Crossref

Mechanochemical Synthesis of Cu-MOF Catalyst for Selective C–H Oxidation and Valorization of Ethylbenzene as a Model Aromatic Hydrocarbon

Chao Xiong, Chong Cao, Yu Nie, Jun Wu iD

ACS Applied Materials & Interfaces · 18.11.2026

DOI: 10.1021/acsami.6c18978 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 18.11.2026. Verfasst von Chao Xiong und 3 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Green Chemical Synthesis and Conversion, College of Chemical Engineering, Zhejiang University of Technology, Hangzhou310014, …. Die Arbeit nennt 61 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Zhejiang Province, Investigation, Assessment, and Site-Specific Remediation Strategies for Landfill Sites in Zhejiang Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Traditional solvothermal synthesis of metal-organic framework (MOF) catalysts for selective C–H oxidation consumes large volumes of organic solvents and requires harsh conditions, and precise regulation of the metal valence state remains challenging. Herein, a Cu-MOF catalyst (Bipy-Cu-BTC) is fabricated by a room-temperature mechanochemical strategy that substantially reduces solvent usage relative to conventional solvothermal routes. Mechanical-force-induced crystal growth and defect engineering generate mixed-valence Cu sites (Cu2+ and reduced Cu species) and a hierarchical micro-mesoporous structure. Under optimized conditions (105 °C, 6 h, acetonitrile as solvent, TBHP as oxidant), the catalyst achieves 99.9% ethylbenzene conversion with 89.7% acetophenone selectivity (89.6% acetophenone yield). Kinetic analysis reveals pseudo-first-order behavior with an apparent activation energy of 85.91 kJ/mol, consistent with surface-reaction-controlled kinetics. EPR and ESI-HRMS confirm tert-butylperoxyl radicals as the dominant reactive intermediates, while the hierarchical pore structure facilitates mass transfer and suppresses deep oxidation. The catalyst retains its structural integrity over multiple cycles, and Cu leaching remains below the ICP-OES detection limit. This work provides a mechanochemical route to low-cost Cu-based MOF catalysts for selective benzylic C–H oxidation and demonstrates the feasibility of valorizing aromatic hydrocarbon substrates under mild conditions.

Schlagwörter

Stichwörter der Autor:innen

Cu-MOF catalystethylbenzene valorizationmechanochemical synthesismixed-valence Cu sitesselective C–H oxidation

Autor:innen und Institutionen

  • State Key Laboratory of Green Chemical Synthesis and Conversion, College of Chemical Engineering, Zhejiang University of Technology, Hangzhou310014, China.
  • Zhejiang Key Laboratory of Low-carbon Control Technology for Industrial Pollution, College of Environment, Zhejiang University of Technology, Hangzhou310014, China.

ORCID-Profile: Jun Wu

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Zhejiang Province
  • Investigation, Assessment, and Site-Specific Remediation Strategies for Landfill Sites in Zhejiang Province
  • Ministry of Education Industry-University Cooperative Collaborative Talent Cultivation Program
  • Central Government Guided Local Science and Technology Development Fund Project

Zitieren

APA

Xiong, C., Cao, C., Nie, Y., & Wu, J. (2026). Mechanochemical Synthesis of Cu-MOF Catalyst for Selective C–H Oxidation and Valorization of Ethylbenzene as a Model Aromatic Hydrocarbon. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c18978

Vancouver

Xiong C, Cao C, Nie Y, Wu J. Mechanochemical Synthesis of Cu-MOF Catalyst for Selective C–H Oxidation and Valorization of Ethylbenzene as a Model Aromatic Hydrocarbon. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c18978

BibTeX
@article{Xiong2026,
  author = {Xiong, Chao and Cao, Chong and Nie, Yu and Wu, Jun},
  title = {Mechanochemical Synthesis of Cu-MOF Catalyst for Selective C–H Oxidation and Valorization of Ethylbenzene as a Model Aromatic Hydrocarbon},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  doi = {10.1021/acsami.6c18978}
}
Kostenlos starten →