Synergy between UiO-66-NH2 and a Hierarchical Aluminum Reservoir for Durable, Self-Replenishing Dry Lubrication
ACS Applied Materials & Interfaces · 11.11.2026 · 18 (44) · 61414-61424
DOI: 10.1021/acsami.6c18855 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 03.11.2026. Verfasst von Dongwon Seo und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Kumoh National Institute of Technology, 61, Daehak-ro, Gumi-si, Gyeongsangbuk-do39177, Republic of Korea. Die Arbeit nennt 36 Literaturangaben. Gefördert von: National Research Foundation of Korea.
Abstract (Originalsprache)
Friction and wear limit the reliability and energy efficiency of mechanical systems, motivating solid lubricants for conditions where liquid lubricants fail. Metal–organic frameworks (MOFs) are attractive owing to their tunable structures and ability to form protective tribofilms, but their low-yield synthesis demands strategies that maximize performance at minimal loading. Herein, we developed a synergistic dry-lubrication strategy in which a hierarchical structure (HS) acts as an integrated reservoir for UiO-66-NH2. Drop-cast MOF particles were anchored within the interconnected concavities of an etched aluminum (Al 5052) substrate bearing a micro/nano hierarchical surface. The anchored UiO-66-NH2 was continuously supplied to the contact interface as a rolling third body, infilling worn regions. Post-test SEM–EDS detected Zr across the wear track, suggesting that the MOF was compacted into a protective MOF-derived layer. The amino-functionalized UiO-66-NH2 showed slightly better wear resistance than carboxyl-functionalized UiO-66-(COOH)2, and performance was further optimized by tuning the MOF concentration (7 mg/mL) and HCl etching time (2 min). Using only 0.56 mg/cm2 of MOF, the surface reduced wear-track width and maximum wear depth by 46.6% and 62.6%, respectively, relative to bare Al sliding against a stainless-steel pin under 1 N. The friction reduction was mainly provided by the HS, whereas UiO-66-NH2 primarily suppressed wear. This durable, self-replenishing approach offers a scalable route to practical MOF-based tribological surfaces.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Kumoh National Institute of Technology, 61, Daehak-ro, Gumi-si, Gyeongsangbuk-do39177, Republic of Korea.
ORCID-Profile: Jihoon Chung
Förderung
- National Research Foundation of Korea
Zitieren
APA
Seo, D., Son, G., Kim, K., Kong, J., & Chung, J. (2026). Synergy between UiO-66-NH2 and a Hierarchical Aluminum Reservoir for Durable, Self-Replenishing Dry Lubrication. ACS Applied Materials & Interfaces, 18(44), 61414-61424. https://doi.org/10.1021/acsami.6c18855
Vancouver
Seo D, Son G, Kim K, Kong J, Chung J. Synergy between UiO-66-NH2 and a Hierarchical Aluminum Reservoir for Durable, Self-Replenishing Dry Lubrication. ACS Applied Materials & Interfaces. 2026;18(44):61414-61424. doi:10.1021/acsami.6c18855
BibTeX
@article{Seo2026,
author = {Seo, Dongwon and Son, Giyoung and Kim, Kyeonghwan and Kong, Jimin and Chung, Jihoon},
title = {Synergy between UiO-66-NH2 and a Hierarchical Aluminum Reservoir for Durable, Self-Replenishing Dry Lubrication},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {44},
pages = {61414--61424},
doi = {10.1021/acsami.6c18855}
}
EUVIMED