EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laser Fabrication of Vibrating Microcavities on Silicon: Formation Dynamics and Frequency Tunability

Belen Valiente, Gonzalo Gomez-Munoz, Mario Garcia-Lechuga, Irene Solana, Fernando Agulló-Rueda, David Grojo, Angel Rodriguez-Fernandez, Javier Solis, Jan Siegel

ACS Applied Materials & Interfaces · 20.11.2026

DOI: 10.1021/acsami.6c18551 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 20.11.2026. Verfasst von Belen Valiente und 8 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerio de Ciencia, Innovación y Universidades.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser processing of silicon has long since become a standard method for wafer dicing, surface texturing, recrystallization after ion implantation, as well as surface amorphization, to name a few examples. Here, we introduce a different concept: the fabrication of vibrating microcavities in a commercial platform, Si wafers covered by a thick SiO2 layer, acting as a membrane. We demonstrate that by exposing our material system to single ultrashort laser pulses above the evaporation threshold of Si, a controlled delamination of the cover layer without fracture can be achieved, leading to the formation of a microcavity accompanied by a surface bulging up to 1.5 μm. The formation dynamics of the microcavities have been investigated by time-resolved optical probe techniques. Ultrafast pump–probe microscopy resolves the initial stages of substrate melting and the onset of layer expansion followed by relaxation. Real-time reflectivity measurements with nanosecond resolution resolve the long-lived, highly complex oscillation process of the membrane, extending over tens of μs. The formed cavities can be re-excited at low fluence without damage or degradation, featuring vibrations at single frequencies with high Q factors. The frequencies can be tuned continuously from 8 MHz up to 19 MHz by adjusting the fabrication fluence. A simple classical model is found to well describe the behavior of the membranes. Our results pave the way for applications in micro- and nano-optics and acoustics, in great part due to the commercial availability of the Si–SiO2 platform and the simplicity of the fabrication method. An extension to the field of microelectromechanical system (MEMS) of this technology is proposed.

Förderung

  • Ministerio de Ciencia, Innovación y Universidades

Zitieren

APA

Valiente, B., Gomez-Munoz, G., Garcia-Lechuga, M., Solana, I., Agulló-Rueda, F., Grojo, D., Rodriguez-Fernandez, A., Solis, J., & Siegel, J. (2026). Laser Fabrication of Vibrating Microcavities on Silicon: Formation Dynamics and Frequency Tunability. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c18551

Vancouver

Valiente B, Gomez-Munoz G, Garcia-Lechuga M, Solana I, Agulló-Rueda F, Grojo D, et al. Laser Fabrication of Vibrating Microcavities on Silicon: Formation Dynamics and Frequency Tunability. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c18551

BibTeX
@article{Valiente2026,
  author = {Valiente, Belen and Gomez-Munoz, Gonzalo and Garcia-Lechuga, Mario and Solana, Irene and Agulló-Rueda, Fernando and Grojo, David and Rodriguez-Fernandez, Angel and Solis, Javier and Siegel, Jan},
  title = {Laser Fabrication of Vibrating Microcavities on Silicon: Formation Dynamics and Frequency Tunability},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  doi = {10.1021/acsami.6c18551}
}
Kostenlos starten →