EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Molecular Architecture of Covalent Adaptable Network Additives Governs Their Integration into Melt-Processed Polyamide 6

Arvindh Sekar, Sithiprumnea Dul iD, Sandro Lehner, Milijana Jović, Cédric Hervieu iD, Fabrizio Crisci, Patrick Rupper iD, Amir Khaki, Ali Gooneie iD, Edith Perret iD, Sabyasachi Gaan iD

ACS Applied Materials & Interfaces · 04.11.2026 · 18 (43) · 60021-60035

DOI: 10.1021/acsami.6c18282 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 26.10.2026. Verfasst von Arvindh Sekar und 10 weiteren Autor:innen. Beteiligte Einrichtung: Advanced Fibers Laboratory, Swiss Federal Laboratories for Materials Science and Technology (Empa), Lerchenfeldstrasse 5, St. Gallen9014, Switzerland. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zürcher Stiftung für Textil-Forschung.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Covalent adaptable networks (CANs) are predominantly developed as bulk thermoset matrices, while their use as dynamically crosslinked functional phases within melt-processed thermoplastics remains largely unexplored. Here, phosphorus-containing CANs (P-CANs) with systematically varied molecular architectures are employed as macromolecular additives in polyamide 6 (PA6) to establish relationships between network structure, dynamic response, dispersion, retention, and melt processability. Transitioning from a rigid small-molecule-derived network to flexible polyphosphonate architectures shifted the glass-transition temperature from 160 to –5 °C and markedly altered stress relaxation and deformation under processing conditions. These architecture-dependent differences translated directly into thermoplastic integration: the rigid P-CAN formed larger phosphorus-rich domains and exhibited greater phosphorus retention, whereas the most flexible network appeared more uniformly dispersed, lowered processing resistance, and promoted shear-thinning behavior. The resulting balance between dispersion and retention enabled kilogram-scale twin-screw compounding and continuous film extrusion of homogeneous PA6 composites containing 5–10 wt % flexible P-CAN. Despite low final phosphorus contents (∼0.25–0.60 wt %), incorporation of the P-CANs increased limiting oxygen index, promoted char formation, and reduced microscale heat release. These results demonstrate that CAN molecular architecture provides a tunable design parameter for controlling the integration and functional performance of dynamically crosslinked polymeric additives in melt-processed thermoplastics.

Schlagwörter

Stichwörter der Autor:innen

covalent adaptable networksfilm extrusionflame-retardant additivespolyamide 6

Autor:innen und Institutionen

  • Advanced Fibers Laboratory, Swiss Federal Laboratories for Materials Science and Technology (Empa), Lerchenfeldstrasse 5, St. Gallen9014, Switzerland.
  • Circular Plastics, Circular Chemical Engineering, Faculty of Science and Engineering, Maastricht University, Brightlands Chemelot Campus, Building 5.1, Urmonderbaan 22, Geleen6167 RD, The Netherlands.

ORCID-Profile: Sithiprumnea Dul, Cédric Hervieu, Patrick Rupper, Ali Gooneie, Edith Perret, Sabyasachi Gaan

Förderung

  • Zürcher Stiftung für Textil-Forschung

Zitieren

APA

Sekar, A., Dul, S., Lehner, S., Jović, M., Hervieu, C., Crisci, F., Rupper, P., Khaki, A., Gooneie, A., Perret, E., & Gaan, S. (2026). Molecular Architecture of Covalent Adaptable Network Additives Governs Their Integration into Melt-Processed Polyamide 6. ACS Applied Materials & Interfaces, 18(43), 60021-60035. https://doi.org/10.1021/acsami.6c18282

Vancouver

Sekar A, Dul S, Lehner S, Jović M, Hervieu C, Crisci F, et al. Molecular Architecture of Covalent Adaptable Network Additives Governs Their Integration into Melt-Processed Polyamide 6. ACS Applied Materials & Interfaces. 2026;18(43):60021-60035. doi:10.1021/acsami.6c18282

BibTeX
@article{Sekar2026,
  author = {Sekar, Arvindh and Dul, Sithiprumnea and Lehner, Sandro and Jović, Milijana and Hervieu, Cédric and Crisci, Fabrizio and Rupper, Patrick and Khaki, Amir and Gooneie, Ali and Perret, Edith and Gaan, Sabyasachi},
  title = {Molecular Architecture of Covalent Adaptable Network Additives Governs Their Integration into Melt-Processed Polyamide 6},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {43},
  pages = {60021--60035},
  doi = {10.1021/acsami.6c18282}
}
Kostenlos starten →