EUVIMEDEUVIMED entdecken
Crossref

Scale-Dependent Friction in Rough SiO2/Single-Crystal MoS2 Contacts

Tianci Chen, Zitong Huang, Mingjian Huang, Kun Liu iD, Yunlong Jiao iD, Jiaxin Ye iD

ACS Applied Materials & Interfaces · 16.11.2026

DOI: 10.1021/acsami.6c18175 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 16.11.2026. Verfasst von Tianci Chen und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Tribology, School of Mechanical Engineering, Hefei University of Technology, Hefei230009, Anhui, China. Die Arbeit nennt 57 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The scale limits of superlubricity in realistic multiasperity contacts remain poorly understood. Although lateral atomic-force cancellation in incommensurate or disordered interfaces can generate low friction, how experimentally accessible contact size, local stress state, and load distribution regulate this scale-dependent behavior remains unclear. Here, we investigate the scale-dependent shear strength of SiO2 glass sphere/single-crystal MoS2 contacts with different sphere radii using atomic force microscopy and a custom microtribometer across extended load ranges. By combining power spectral density-based random rough surface generation with boundary element method simulations, we evaluate a dimensionless contact-scale parameter ai/bcore,i defined by the ratio between contact-patch radius and a characteristic elastic core width in rough multiasperity interfaces. The results show that the effective shear strength decreases continuously with increasing real contact area at small-to-intermediate contact scales, consistent with enhanced statistical cancellation of lateral atomic forces expected for disordered interfaces. As contact scale further increases, this reduction is progressively suppressed as the maximum scale parameter (ai/bcore,i)max approaches unity and an increasing fraction of the load is carried by contact patches satisfying ai/bcore,i > 1. The R = 2.5 mm probe condition exhibits a higher effective shear strength and a broader simulated contact-pressure distribution than the smaller-probe conditions. However, because sphere radius and the measured roughness spectrum were not independently varied, these differences cannot be attributed uniquely to sphere curvature. Instead, they reflect the combined influence of probe geometry, roughness statistics, and the resulting multiasperity contact state. Our results establish a multiscale framework linking atomic-force cancellation, finite contact-size effects, and rough-contact statistics, revealing how structural superlubricity gradually loses its scale invariance in realistic multiasperity interfaces.

Schlagwörter

Stichwörter der Autor:innen

MoS2boundary element methodcontact mechanicsfriction scalingmultiasperity contactrough interfacesshear strength

Autor:innen und Institutionen

  • Institute of Tribology, School of Mechanical Engineering, Hefei University of Technology, Hefei230009, Anhui, China.

ORCID-Profile: Kun Liu, Yunlong Jiao, Jiaxin Ye

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Chen, T., Huang, Z., Huang, M., Liu, K., Jiao, Y., & Ye, J. (2026). Scale-Dependent Friction in Rough SiO2/Single-Crystal MoS2 Contacts. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c18175

Vancouver

Chen T, Huang Z, Huang M, Liu K, Jiao Y, Ye J. Scale-Dependent Friction in Rough SiO2/Single-Crystal MoS2 Contacts. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c18175

BibTeX
@article{Chen2026,
  author = {Chen, Tianci and Huang, Zitong and Huang, Mingjian and Liu, Kun and Jiao, Yunlong and Ye, Jiaxin},
  title = {Scale-Dependent Friction in Rough SiO2/Single-Crystal MoS2 Contacts},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  doi = {10.1021/acsami.6c18175}
}
Kostenlos starten →