Nanofibrous Thermo-Optical Materials for Spacecraft Passive Thermal Control
ACS Applied Materials & Interfaces · 12.11.2026
DOI: 10.1021/acsami.6c17869 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 12.11.2026. Verfasst von Chieloka Ibekwe und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical, Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute, Troy, New York12180, United States. Die Arbeit nennt 70 Literaturangaben. Gefördert von: NASA, National Aeronautics and Space Administration.
Abstract (Originalsprache)
Passive thermal control is essential for spacecraft operating in extreme extraterrestrial environments, where minimizing solar heat absorption while maximizing thermal radiation is critical for maintaining acceptable onboard temperatures without additional energy consumption. Here, electrospun nanofibrous materials, represented by a polymeric polytetrafluoroethylene:polyethylene oxide (PTFE:PEO) composite and ceramic silica, are introduced as a new class of lightweight spacecraft thermal control materials combining ultrahigh solar reflectance (or ultralow solar absorptance), strong infrared emittance, and environmental durability. Under flight-representative conditions in NASA's deep-space thermal simulator, including the cryogenic radiative background of deep space (<20 K), high vacuum (10–6 Torr), and AM0 solar irradiation (1367 W m–2), PTFE:PEO and silica nanofibers reached equilibrium temperatures of 143.2 and 137.4 K, respectively, compared with 281.4 K for aluminum foil. These values correspond to temperature reductions of 138.2 and 144 K, respectively, relative to aluminum foil. Complementary thermal modeling demonstrated that nanofibrous materials could reduce heat ingress relative to conventional multilayer insulation (MLI). Equivalent thermal performance could be achieved with substantially thinner and lighter nanofibrous insulation. Furthermore, the silica nanofibers showed about 60% greater resistance to atomic oxygen than Kapton, while thermal treatment significantly improved the atomic oxygen resistance of PTFE:PEO. These findings demonstrate the potential of electrospun nanofibrous architectures for passive thermal control of spacecraft and emerging space-based infrastructure, where favorable thermo-optical performance, environmental durability, and low mass are critical.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical, Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute, Troy, New York12180, United States.
- NASA Kennedy Space Center, Merritt Island, Florida32899, United States.
- NASA Glenn Research Center , Cleveland, Ohio44135, United States.
ORCID-Profile: Chieloka Ibekwe, Shankar Narayan
Förderung
- NASA
- National Aeronautics and Space Administration
Zitieren
APA
Ibekwe, C., Wang, X., Hossain, M. J., Bolzani, B. N., O'Brien, C., Waataja, C. J., Swanger, A. M., Hartwig, J. W., & Narayan, S. (2026). Nanofibrous Thermo-Optical Materials for Spacecraft Passive Thermal Control. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c17869
Vancouver
Ibekwe C, Wang X, Hossain MJ, Bolzani BN, O'Brien C, Waataja CJ, et al. Nanofibrous Thermo-Optical Materials for Spacecraft Passive Thermal Control. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c17869
BibTeX
@article{Ibekwe2026,
author = {Ibekwe, Chieloka and Wang, Xuanjie and Hossain, Md Jahangir and Bolzani, Brandon N and O'Brien, Connor and Waataja, Cooper J and Swanger, Adam M and Hartwig, Jason W and Narayan, Shankar},
title = {Nanofibrous Thermo-Optical Materials for Spacecraft Passive Thermal Control},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
doi = {10.1021/acsami.6c17869}
}
EUVIMED