EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Nanoparticle Surface Curvature Impacts the Synthesis of Polymer Brushes

Jensen N Sevening, Jupjeet S Dhingra, Kavindi S Sabaratne, Adri C T van Duin iD, Robert J Hickey iD

ACS Applied Materials & Interfaces · 28.10.2026 · 18 (42) · 58441-58451

DOI: 10.1021/acsami.6c17339 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 16.10.2026. Verfasst von Jensen N Sevening und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, The Pennsylvania State University, University Park, Pennsylvania16802, United States. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Office of Naval Research, Air Force Research Laboratory.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Surface-initiated ring-opening metathesis polymerization (SI-ROMP) is a powerful method for grafting polymers with different macromolecular architectures and chemical compositions onto surfaces, offering the potential to design hybrid materials with tailored properties. However, inherent challenges remain, especially regarding secondary metathesis reactions, resulting in lower graft polymer conversion, broader molecular weight distributions, and the formation of free polymer. Here, we report that surface curvature plays a critical role in the graft-from polymerization of poly(cyclooctadiene) (PCOD)-grafted silica nanoparticles, where nanoparticles with high curvature (i.e., smaller diameters) reach targeted molecular weights and graft densities, and calculated dry brush heights, which is ascribed to fewer interchain cross-metathesis occurrences. SI-ROMP was conducted on a series of silica particles with diameters ranging from 13 to 128 nm, representing surfaces that are highly curved to essentially flat, respectively. The nanoparticle curvature was quantified by the ratio of the nanoparticle radius (R) to the dry brush height (h), where R/h values much greater than 1 signify a “flat” surface. Smaller particles (e.g., 13 nm diameter), with higher surface curvature (R/h ≈ 1), demonstrated more successful grafting and higher polymer conversion compared to larger particles with flatter surfaces (R/h ≈ 10). ReaxFF-based reactive molecular dynamics simulations revealed that polymer chain grafting density, which controls neighboring chain proximity, directly affects the propensity of secondary metathesis. Fewer secondary metathesis events occur as the spacing between neighboring polymer chains increases. The findings highlight the role of propagating chain proximity in facilitating or deterring secondary metathesis, which influences the uniformity of graft chains and polymerization efficiency. The effects of particle surface curvature in surface-initiated polymerizations, particularly with respect to SI-ROMP, are an overlooked parameter, yet provide a path forward for improving graft quality on lower curvature surfaces.

Schlagwörter

Stichwörter der Autor:innen

ReaxFFSI-ROMPnanoparticlespolymer brushessecondary metathesissurface-initiated polymerization

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, The Pennsylvania State University, University Park, Pennsylvania16802, United States.
  • Department of Mechanical Engineering, The Pennsylvania State University, University Park, Pennsylvania16802, United States.
  • Department of Chemistry, The Pennsylvania State University, University Park, Pennsylvania16802, United States.
  • Materials Research Institute, The Pennsylvania State University, University Park, Pennsylvania16802, United States.

ORCID-Profile: Adri C T van Duin, Robert J Hickey

Förderung

  • Office of Naval Research
  • Air Force Research Laboratory

Zitieren

APA

Sevening, J. N., Dhingra, J. S., Sabaratne, K. S., van Duin, A. C. T., & Hickey, R. J. (2026). Nanoparticle Surface Curvature Impacts the Synthesis of Polymer Brushes. ACS Applied Materials & Interfaces, 18(42), 58441-58451. https://doi.org/10.1021/acsami.6c17339

Vancouver

Sevening JN, Dhingra JS, Sabaratne KS, van Duin ACT, Hickey RJ. Nanoparticle Surface Curvature Impacts the Synthesis of Polymer Brushes. ACS Applied Materials & Interfaces. 2026;18(42):58441-58451. doi:10.1021/acsami.6c17339

BibTeX
@article{Sevening2026,
  author = {Sevening, Jensen N and Dhingra, Jupjeet S and Sabaratne, Kavindi S and van Duin, Adri C T and Hickey, Robert J},
  title = {Nanoparticle Surface Curvature Impacts the Synthesis of Polymer Brushes},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {42},
  pages = {58441--58451},
  doi = {10.1021/acsami.6c17339}
}
Kostenlos starten →