Extending Self-Assembled Monolayer Interface Engineering to Carbon-Based Perovskite Solar Cells
ACS Applied Materials & Interfaces · 11.11.2026 · 18 (44) · 61004-61010
DOI: 10.1021/acsami.6c17328 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 27.10.2026. Verfasst von Qinjie Wu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore639798, Singapore. Die Arbeit nennt 34 Literaturangaben. Gefördert von: National Research Foundation Singapore.
Abstract (Originalsprache)
Printable carbon-based perovskite solar cells (C-PSCs) offer a low-cost and durable photovoltaic platform but remain limited by poor interfacial charge extraction and substantial nonradiative recombination at the perovskite/carbon junction suppressing open-circuit voltage (VOC). While phosphonic acid–based self-assembled monolayers (SAMs) are widely used in p–i–n devices, their application in mesoscopic carbon architectures remains unexplored. Here, we report a simple post-treatment based on the molecular self-assembled monolayer MeO-2PACz to address these bottlenecks in triple-mesoscopic TiO2/ZrO2/carbon architectures. MeO-2PACz treatment modulates the perovskite/carbon interface, improving energy-level alignment and passivating undercoordinated Pb2+ sites. Transient photocurrent and transient photovoltage analyses show accelerated charge extraction and extended recombination lifetimes. Consequently, the SAM-treated devices achieve enhanced VOC (0.90 V), fill factor (70.7%), and a champion power conversion efficiency (PCE) of 14.7%, along with suppressed hysteresis and improved stability, retaining 98% of initial PCE after 2400 h under controlled humidity without encapsulation.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore639798, Singapore.
- Energy Research Institute @ NTU (ERI@N), Nanyang Technological University, 50 Nanyang Drive, Singapore637553, Singapore.
- School of Electrical and Electronic Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore639798, Singapore.
ORCID-Profile: Natalia Yantara, Wei Lin Leong, Nripan Mathews
Förderung
- National Research Foundation Singapore
Zitieren
APA
Wu, Q., Yantara, N., Tay, Y. B., Fu, H., Xing, X., Leong, W. L., & Mathews, N. (2026). Extending Self-Assembled Monolayer Interface Engineering to Carbon-Based Perovskite Solar Cells. ACS Applied Materials & Interfaces, 18(44), 61004-61010. https://doi.org/10.1021/acsami.6c17328
Vancouver
Wu Q, Yantara N, Tay YB, Fu H, Xing X, Leong WL, et al. Extending Self-Assembled Monolayer Interface Engineering to Carbon-Based Perovskite Solar Cells. ACS Applied Materials & Interfaces. 2026;18(44):61004-61010. doi:10.1021/acsami.6c17328
BibTeX
@article{Wu2026,
author = {Wu, Qinjie and Yantara, Natalia and Tay, Yeow Boon and Fu, Hongkang and Xing, Xuechao and Leong, Wei Lin and Mathews, Nripan},
title = {Extending Self-Assembled Monolayer Interface Engineering to Carbon-Based Perovskite Solar Cells},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {44},
pages = {61004--61010},
doi = {10.1021/acsami.6c17328}
}
EUVIMED