Architecting Co-continuous PVDF Composites via Multi-material 3D Parallel Printing for Enhanced Piezoelectricity and Wearable Sensing
ACS Applied Materials & Interfaces · 04.11.2026 · 18 (43) · 60009-60020
DOI: 10.1021/acsami.6c17324 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 22.10.2026. Verfasst von Min Yuan und 8 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Fiber Materials, College of Materials Science and Engineering, Donghua University, Shanghai201620, China. Die Arbeit nennt 48 Literaturangaben. Gefördert von: Fundamental Research Funds for the Central Universities, Natural Science Foundation of Shanghai, National Natural Science Foundation of China (NSFC).
Abstract (Originalsprache)
Flexible piezoelectric composites have attracted considerable attention for self-powered sensing; however, achieving efficient electromechanical response while maintaining structural integrity under repeated deformation remains challenging. Herein, a structure-driven multi-material 3D parallel printing strategy is developed to construct polyvinylidene fluoride (PVDF)-based piezoelectric composites with a co-continuous dual-phase architecture. In this design, ionic liquid (IL)-modified PVDF serves as the piezoelectric phase, where the IL promotes β-phase formation and dipole orientation, while carbon nanotubes (CNTs)-reinforced PVDF provides a conductive phase for electrical signal collection. Unlike conventional stacked configurations, the parallel-printed architecture enables continuous integration of the piezoelectric and conductive phases, providing intimate interfacial contact and a mechanically interconnected structure. The resulting structural continuity facilitates stress transfer during mechanical deformation and contributes to a stable electromechanical response. Kelvin probe force microscopy measurements further reveal an interfacial potential difference of 85.6 mV, indicating distinct interfacial electrical characteristics between the two phases. The optimized sensor delivers an output voltage of 0.55 V at 5 N, a sensitivity of 439.77 mV/N in the low-force regime, and a response time of 28 ms, together with excellent mechanical stability. Finite element analysis and experimental results demonstrate that the enhanced piezoelectric response is closely associated with the continuous deformation and effective stress transfer enabled by the parallel architecture. The sensor further exhibits reliable performance in human-motion monitoring and human–machine interaction. This work establishes multi-material 3D parallel printing as a structure-engineering approach for integrating piezoelectric and conductive phases and provides a versatile route toward high-performance flexible piezoelectric sensing devices.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Advanced Fiber Materials, College of Materials Science and Engineering, Donghua University, Shanghai201620, China.
- College of Chemical Engineering, Shanghai Modern Chemical Industry Vocational College, Shanghai201512, China.
- Key Laboratory of High Performance Fibers & Products, Ministry of Education, Donghua University, Shanghai201620, China.
- Composite Materials Research Centre, School of Materials Science and Engineering, Shanghai University, Shanghai200444, China.
ORCID-Profile: Ye Chen
Förderung
- Fundamental Research Funds for the Central Universities
- Natural Science Foundation of Shanghai
- National Natural Science Foundation of China (NSFC)
Zitieren
APA
Yuan, M., Zhang, H., Peng, L., Li, X., Guo, Y., Ke, F., Wang, H., Chen, Y., & Sun, J. (2026). Architecting Co-continuous PVDF Composites via Multi-material 3D Parallel Printing for Enhanced Piezoelectricity and Wearable Sensing. ACS Applied Materials & Interfaces, 18(43), 60009-60020. https://doi.org/10.1021/acsami.6c17324
Vancouver
Yuan M, Zhang H, Peng L, Li X, Guo Y, Ke F, et al. Architecting Co-continuous PVDF Composites via Multi-material 3D Parallel Printing for Enhanced Piezoelectricity and Wearable Sensing. ACS Applied Materials & Interfaces. 2026;18(43):60009-60020. doi:10.1021/acsami.6c17324
BibTeX
@article{Yuan2026,
author = {Yuan, Min and Zhang, Huiying and Peng, Long and Li, Xinping and Guo, Yanyan and Ke, Fuyou and Wang, Huaping and Chen, Ye and Sun, Jinliang},
title = {Architecting Co-continuous PVDF Composites via Multi-material 3D Parallel Printing for Enhanced Piezoelectricity and Wearable Sensing},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {43},
pages = {60009--60020},
doi = {10.1021/acsami.6c17324}
}
EUVIMED