EUVIMEDEUVIMED entdecken
Crossref

Dynamic Energy-Dissipating Interface Design Reconciles Thermal Performance with Interfacial Reliability

Zhichong Ma iD, Yang Ding, Kang Zhou, Chuanbiao Zhu, Xiangyu Zhao, Xiangying Tang iD, Xiaohu Wu, Xiang Lu iD

ACS Applied Materials & Interfaces · 04.11.2026 · 18 (43) · 59994-60008

DOI: 10.1021/acsami.6c17285 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 26.10.2026. Verfasst von Zhichong Ma und 7 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Material Chemistry for Energy Conversion and Storage of Ministry of Education; Hubei Key Laboratory of Material Chemistry and Servi…. Die Arbeit nennt 57 Literaturangaben. Gefördert von: National Natural Science Foundation of China (NSFC).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Highly filled thermal interface materials (TIMs) are essential for reliable heat dissipation in high-power electronics, yet restricted polymer chain mobility and reduced interfacial conformability make it difficult to achieve high thermal conductivity, strong adhesion, and crack-growth resistance simultaneously. We propose a dynamic energy-dissipating interface (DEDI) strategy that coordinates favorable interfacial affinity, stable chemical anchoring, and dynamic bulk energy dissipation to improve interfacial stability and crack resistance in highly filled TIMs. γ-Methacryloxypropyl trimethoxysilane (γ-MPS) provides stable chemical anchoring at the substrate interface, while urethane-associated polar interactions contribute to favorable interfacial affinity. Reversible disulfide and hydrogen-bond interactions within the bulk network promote deformation accommodation and mechanical energy dissipation. Surface-modified Al2O3/ZnO hybrid fillers form a multiscale network that provides efficient heat-transfer pathways. The resulting PSM-60-1.2 exhibits a thermal conductivity of 3.88 W·m−1·K−1, an adhesion strength of 4.25 MPa, and an adhesion energy of 3080.04 J·m−2. Combined experimental and finite-element analyses support coordinated interfacial stabilization, bulk energy dissipation, and enhanced thermomechanical deformation accommodation. After 100 thermal shock cycles between −40 and 150 °C, PSM-60-1.2 shows a 6.0 °C increase in maximum steady-state temperature, compared with 16.2 °C for the commercial thermally conductive adhesive, with less interfacial cracking and low-viscosity liquid infiltration. The DEDI design offers a molecular strategy for combining high thermal conductivity, high adhesion energy, and long-term thermomechanical reliability in highly filled TIMs.

Schlagwörter

Stichwörter der Autor:innen

dynamic energy-dissipating interfacehigh adhesion energyhighly filled thermal interface materialsstable heat dissipationthermal shock stability

Autor:innen und Institutionen

  • Key Laboratory of Material Chemistry for Energy Conversion and Storage of Ministry of Education; Hubei Key Laboratory of Material Chemistry and Service Failure and Hubei Engineering Research Center for Biomaterials and…
  • School of Integrated Circuits, Hubei University, Wuhan430062, China.
  • Yangtze Laboratory, Wuhan430205, China.

ORCID-Profile: Zhichong Ma, Xiangying Tang, Xiang Lu

Förderung

  • National Natural Science Foundation of China (NSFC)

Zitieren

APA

Ma, Z., Ding, Y., Zhou, K., Zhu, C., Zhao, X., Tang, X., Wu, X., & Lu, X. (2026). Dynamic Energy-Dissipating Interface Design Reconciles Thermal Performance with Interfacial Reliability. ACS Applied Materials & Interfaces, 18(43), 59994-60008. https://doi.org/10.1021/acsami.6c17285

Vancouver

Ma Z, Ding Y, Zhou K, Zhu C, Zhao X, Tang X, et al. Dynamic Energy-Dissipating Interface Design Reconciles Thermal Performance with Interfacial Reliability. ACS Applied Materials & Interfaces. 2026;18(43):59994-60008. doi:10.1021/acsami.6c17285

BibTeX
@article{Ma2026,
  author = {Ma, Zhichong and Ding, Yang and Zhou, Kang and Zhu, Chuanbiao and Zhao, Xiangyu and Tang, Xiangying and Wu, Xiaohu and Lu, Xiang},
  title = {Dynamic Energy-Dissipating Interface Design Reconciles Thermal Performance with Interfacial Reliability},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {43},
  pages = {59994--60008},
  doi = {10.1021/acsami.6c17285}
}
Kostenlos starten →