EUVIMEDEUVIMED entdecken
Crossref

Self-Powered Actuation of Commercial UV Sensors via Single-Electrode Triboelectric Nanogenerators Using Self-Exposed MXene Nanosheets in Porous Dielectrics

Han Kyu Oh, Min Soo Jeon, Jeonghoon Lee, Haeyeon Lee, Sungwon Jo, Garam Ku, Minjae Kim, Min Ku Kim, Dong Rip Kim

ACS Applied Materials & Interfaces · 20.11.2026

DOI: 10.1021/acsami.6c17140 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 20.11.2026. Verfasst von Han Kyu Oh und 8 weiteren Autor:innen. Die Arbeit nennt 63 Literaturangaben. Gefördert von: National Research Foundation of Korea, Agency for Defense Development.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Triboelectric nanogenerators (TENGs) have emerged as pivotal sustainable energy harvesters. However, single-electrode configurations, despite their structural simplicity and seamless circuit integration, suffer from inherently low output performance compared to double-electrode systems, primarily due to the absence of a top electrode and reduced potential difference across the dielectric layer. To overcome this limitation, we report a high-output, single-electrode TENG platform featuring a porous dielectric layer with self-exposed MXene nanosheets. By monolithically integrating this layer onto a flexible electrode via a water steaming process, we simultaneously achieve structural and interfacial modifications that promote charge accumulation and electrostatic induction. Specifically, the porous structure increases the effective contact area, while the migration and self-exposure of hydrophilic MXene nanosheets at the water–polydimethylsiloxane interfaces during droplet-templating modify the surface electrostatic properties, enhancing the triboelectric performance of the device. The resulting device delivers a remarkable peak power density of 5870 mW/m2 under hand tapping. Crucially, this superior output achieves a 24–28% faster charging rate than MXene-embedded counterparts. The practical utility of our platform is validated through the successful actuation of a commercial UV index sensor system. Operated entirely without external power, the seamless integration of this TENG with standard electronic components demonstrates a fully independent, self-sustainable power solution for practical environmental monitoring. This study provides a robust strategy to enhance energy-harvesting performance of single-electrode TENGs, thereby enabling diverse self-powered applications in next generation electronics.

Förderung

  • National Research Foundation of Korea
  • Agency for Defense Development

Zitieren

APA

Oh, H. K., Jeon, M. S., Lee, J., Lee, H., Jo, S., Ku, G., Kim, M., Kim, M. K., & Kim, D. R. (2026). Self-Powered Actuation of Commercial UV Sensors via Single-Electrode Triboelectric Nanogenerators Using Self-Exposed MXene Nanosheets in Porous Dielectrics. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c17140

Vancouver

Oh HK, Jeon MS, Lee J, Lee H, Jo S, Ku G, et al. Self-Powered Actuation of Commercial UV Sensors via Single-Electrode Triboelectric Nanogenerators Using Self-Exposed MXene Nanosheets in Porous Dielectrics. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c17140

BibTeX
@article{Oh2026,
  author = {Oh, Han Kyu and Jeon, Min Soo and Lee, Jeonghoon and Lee, Haeyeon and Jo, Sungwon and Ku, Garam and Kim, Minjae and Kim, Min Ku and Kim, Dong Rip},
  title = {Self-Powered Actuation of Commercial UV Sensors via Single-Electrode Triboelectric Nanogenerators Using Self-Exposed MXene Nanosheets in Porous Dielectrics},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  doi = {10.1021/acsami.6c17140}
}
Kostenlos starten →