EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polyethyleneimine-Impregnated Exfoliated Layered Double Hydroxide-Based Nanosheets for Direct Air Capture of CO2

Matthew R L Williams, Yifei Xu, Roland C Turnell-Ritson iD, Rongjie Ma, Xuancan Zhu iD, Dermot O'Hare iD

ACS Applied Materials & Interfaces · 28.10.2026 · 18 (42) · 58210-58225

DOI: 10.1021/acsami.6c17102 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 19.10.2026. Verfasst von Matthew R L Williams und 5 weiteren Autor:innen. Beteiligte Einrichtung: Chemistry Research Laboratory, Department of Chemistry, University of Oxford, 12 Mansfield Road, OxfordOX1 3TA, UK. Die Arbeit nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Henry Royce Institute, National Natural Science Foundation of China, SCG Chemicals.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accumulation of atmospheric carbon dioxide demands innovations in sorbent technologies capable of direct CO2 removal from ambient air. Herein, we report the aqueous miscible organic solvent treatment (AMOST) of borate-intercalated layered double hydroxides (LDHs), forming highly exfoliated Mg3Al-LDH nanosheets, and evaluate them as high surface area supports for polyethyleneimine (PEI)-based direct air capture (DAC). Compared with carbonate-intercalated Mg3Al-LDH, the borate-intercalated analogue undergoes substantially greater AMOST-induced exfoliation, producing predominantly mono-/few-layer nanosheets with a very high specific surface area of 762 m2 g–1 and a total pore volume of 3.02 cm3 g–1. The high surface area and porosity allow incorporation using a nominal PEI loading of 67 wt %, enabling direct comparison of the carbonate- and borate-derived support architectures. Under humid breakthrough conditions at 400 ppm CO2/N2 and 25 °C, the borate-derived PEI-Mg3Al-LDH composite can achieve a high CO2 uptake of 2.90 mmol g–1, reaching 78% capacity in 20 min, demonstrating fast sorption kinetics. The sorbent also exhibits 96 % capacity retention after 20 adsorption–desorption cycles – competitive with reported PEI-supported solid amine sorbents measured under comparable dry DAC conditions. These results establish borate-assisted LDH exfoliation as a promising strategy for preparing high surface area supports for solid amine DAC sorbents.

Schlagwörter

Stichwörter der Autor:innen

LDH nanosheetsaqueous miscible organic solvent treatmentcarbon dioxide capturedirect air capturelayered double hydroxidespolyethyleneimine

Autor:innen und Institutionen

  • Chemistry Research Laboratory, Department of Chemistry, University of Oxford, 12 Mansfield Road, OxfordOX1 3TA, UK.
  • Research Centre of Solar Power & Refrigeration, School of Mechanical Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai200240, China.

ORCID-Profile: Roland C Turnell-Ritson, Xuancan Zhu, Dermot O'Hare

Förderung

  • Henry Royce Institute
  • National Natural Science Foundation of China
  • SCG Chemicals

Zitieren

APA

Williams, M. R. L., Xu, Y., Turnell-Ritson, R. C., Ma, R., Zhu, X., & O'Hare, D. (2026). Polyethyleneimine-Impregnated Exfoliated Layered Double Hydroxide-Based Nanosheets for Direct Air Capture of CO2. ACS Applied Materials & Interfaces, 18(42), 58210-58225. https://doi.org/10.1021/acsami.6c17102

Vancouver

Williams MRL, Xu Y, Turnell-Ritson RC, Ma R, Zhu X, O'Hare D. Polyethyleneimine-Impregnated Exfoliated Layered Double Hydroxide-Based Nanosheets for Direct Air Capture of CO2. ACS Applied Materials & Interfaces. 2026;18(42):58210-58225. doi:10.1021/acsami.6c17102

BibTeX
@article{Williams2026,
  author = {Williams, Matthew R L and Xu, Yifei and Turnell-Ritson, Roland C and Ma, Rongjie and Zhu, Xuancan and O'Hare, Dermot},
  title = {Polyethyleneimine-Impregnated Exfoliated Layered Double Hydroxide-Based Nanosheets for Direct Air Capture of CO2},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {42},
  pages = {58210--58225},
  doi = {10.1021/acsami.6c17102}
}
Kostenlos starten →