Tuning Inter- and Intraparticle Crosslinking and Packing Density Governs the 3D Bioprintability and Biological Performance
ACS Applied Materials & Interfaces · 16.11.2026
DOI: 10.1021/acsami.6c17034 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 16.11.2026. Verfasst von Asma-Sadat Vaziri und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomaterials and Biomedical Technology, The Personalized Medicine Research Institute (PRECISION), University Medical Center Groningen (…. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Nederlandse Organisatie voor Wetenschappelijk Onderzoek, University Medical Center Groningen.
Abstract (Originalsprache)
Granular hydrogels are an emerging class of microporous biomaterials assembled from annealable microparticles that enhance cell survival, function, infiltration, and cell migration through their interconnected cell-scale void spaces. Here, we aimed to understand how balancing inter- and intraparticle interactions, alongside microparticle packing density, influences the printability and cellular responses of granular hydrogels. Mechanically fragmented microparticles, made of tyramine-modified alginate (TAlg) and gelatin (TGel), underwent primary enzymatic gelation and secondary photocrosslinking for construct stabilization. Balancing this two-scale chemical trade-off yielded a compressive modulus of 12.9–24.7 kPa, while rapid photoinitiator clearance (>90% within 1 h) ensured high cytocompatibility. Incorporating 10–40 vol % interstitial matrix tuned total porosity from ∼7 to 18%, with medium-packed inks (20 vol % matrix) achieving high fidelity for three-dimensional (3D) bioprinting without sacrificing void connectivity. The resulting interconnected network accelerated cell infiltration to a depth of 450 μm within 3 days (∼3-fold higher than bulk hydrogels) and enabled ex vivo tissue adhesion (7.1 kPa shear strength). 3D-bioprinted granular constructs supported dense interconnected 3D cellular network formation over 7 days. This scalable strategy to deconstruct di-tyramine-mediated bulk hydrogels provides a versatile toolbox for advanced biofabrication and complex tissue engineering.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Biomaterials and Biomedical Technology, The Personalized Medicine Research Institute (PRECISION), University Medical Center Groningen (UMCG), University of Groningen, 9713 AVGroningen, The Netherlands.
ORCID-Profile: Monize C Decarli, Hélder A Santos
Förderung
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek
- University Medical Center Groningen
Zitieren
APA
Vaziri, A. S., Agresti, L., Decarli, M. C., van Kooten, T., Shahbazi, M. A., Sjollema, J., & Santos, H. A. (2026). Tuning Inter- and Intraparticle Crosslinking and Packing Density Governs the 3D Bioprintability and Biological Performance. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c17034
Vancouver
Vaziri AS, Agresti L, Decarli MC, van Kooten T, Shahbazi MA, Sjollema J, et al. Tuning Inter- and Intraparticle Crosslinking and Packing Density Governs the 3D Bioprintability and Biological Performance. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c17034
BibTeX
@article{Vaziri2026,
author = {Vaziri, Asma-Sadat and Agresti, Liliana and Decarli, Monize C and van Kooten, Theo and Shahbazi, Mohammad-Ali and Sjollema, Jelmer and Santos, Hélder A},
title = {Tuning Inter- and Intraparticle Crosslinking and Packing Density Governs the 3D Bioprintability and Biological Performance},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
doi = {10.1021/acsami.6c17034}
}
EUVIMED