Na-Layer K+ Pillaring with CeO2 Coating Enables High-Rate and Air-Stable P2-Type NaMn-Layered Oxide Cathodes
ACS Applied Materials & Interfaces · 04.11.2026
DOI: 10.1021/acsami.6c16701 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 04.11.2026. Verfasst von Xiaohong Liu und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing100029, China. Die Arbeit nennt 58 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Science and Technology Department of Xinjiang Uyghur Autonomous Region.
Abstract (Originalsprache)
P2-type NaxMnO2 cathodes offer high capacity and elemental abundance, yet their practical application is limited by the Jahn–Teller distortion of Mn3+ and irreversible phase transitions that drive structural degradation, capacity fading, and air sensitivity. Prevailing strategies rely predominantly on element substitution at transition-metal sites, whether via single or dual doping, or in combination with coating, but inevitably impose a capacity–stability trade-off rooted in the alteration of the TM–O framework. Here, we demonstrate a synergistic strategy to construct a high-rate, air-stable P2-Na0.62K0.05MnO2/CeO2 cathode, by combining K+ bulk doping at Na sites with a CeO2 surface coating. The K+ bulk doping mitigates the Jahn–Teller effect, eliminates the low-voltage P2–P′2 transition, and converts the high-voltage P2–OP4 transition into a solid-solution reaction, while the CeO2 overlayer concurrently provides resistance to ambient air. The optimized Na0.62K0.05MnO2/CeO2 cathode delivers 67.95 mAh g–1 at 10C, retains 84.00% of its capacity after 200 cycles at 1C and 71.03% after 500 cycles at 5C, and preserves structural integrity after air exposure and water immersion. This dual-modification approach establishes Na-site doping as a design principle that decouples structural stabilization from transition-metal redox activity in P2-type oxide cathodes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing100029, China.
ORCID-Profile: Sailong Xu
Förderung
- National Natural Science Foundation of China
- Science and Technology Department of Xinjiang Uyghur Autonomous Region
Zitieren
APA
Liu, X., Zheng, X., Chang, Y. X., Huang, K., & Xu, S. (2026). Na-Layer K+ Pillaring with CeO2 Coating Enables High-Rate and Air-Stable P2-Type NaMn-Layered Oxide Cathodes. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c16701
Vancouver
Liu X, Zheng X, Chang YX, Huang K, Xu S. Na-Layer K+ Pillaring with CeO2 Coating Enables High-Rate and Air-Stable P2-Type NaMn-Layered Oxide Cathodes. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c16701
BibTeX
@article{Liu2026,
author = {Liu, Xiaohong and Zheng, Xiaohui and Chang, Yu-Xin and Huang, Kaili and Xu, Sailong},
title = {Na-Layer K+ Pillaring with CeO2 Coating Enables High-Rate and Air-Stable P2-Type NaMn-Layered Oxide Cathodes},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
doi = {10.1021/acsami.6c16701}
}
EUVIMED