EUVIMEDEUVIMED entdecken
Crossref

Molecular Anchoring and Multiscale Porosity Synergize in 3D Printed Polyimide Composites for High-Temperature Thermal Management

Shixiao Wang, Tianqi Pang, Zhiyu Yao, Mutian Li, Liang Zhang iD, Min Gong iD, Xiang Lin iD, Fengxian Gao, Dongrui Wang iD

ACS Applied Materials & Interfaces · 12.11.2026

DOI: 10.1021/acsami.6c16546 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 12.11.2026. Verfasst von Shixiao Wang und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing100083, P. R. China. Die Arbeit nennt 37 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities, Gansu Province Key Research and Development Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The large-scale application of energy storage systems such as lithium-ion batteries, which feature high energy density and considerable flammability risks, has created an urgent demand for thermal management materials that offer lightweight construction, high-temperature resistance, efficient insulation, and customizable shaping. Polyimide (PI) is a promising candidate; however, its additive manufacturing is constrained by the high temperatures required for thermal imidization and the severe shrinkage that accompanies this process. To overcome these limitations, herein, an interfacial chemical anchoring strategy is introduced, through which amino-functionalized hollow glass microspheres (HGMs) are covalently integrated into a soluble PI matrix. The achieved composite ink is well-suited for vapor-induced phase separation (VIPS)-assisted direct ink writing (DIW), allowing in situ porosification. The 3D printed constructs thus feature a hierarchical thermal resistance architecture, including macroscopic air gaps from printing, microporous networks derived from phase separation, and hollow HGM cavities, which synergistically suppresses solid conduction, gas convection, and thermal radiation. In addition, the covalently anchored microspheres also serve as crosslinking nodes, enhancing compressive strength. The optimized composites achieve a 35% reduction in density, shrinkage below 5%, a thermal conductivity of 0.048 W·m–1·K–1, and a nearly fourfold improvement in compressive strength. Together, these results demonstrate that the synergy between interfacial chemical anchoring and VIPS-assisted DIW provides a versatile platform for engineering lightweight, high-strength insulation components with tailored geometries for demanding high-temperature applications.

Schlagwörter

Stichwörter der Autor:innen

3D printingpolyimidesustainabilitythermal managementvapor-induced phase separation

Autor:innen und Institutionen

  • School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing100083, P. R. China.

ORCID-Profile: Liang Zhang, Min Gong, Xiang Lin, Dongrui Wang

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities
  • Gansu Province Key Research and Development Program

Zitieren

APA

Wang, S., Pang, T., Yao, Z., Li, M., Zhang, L., Gong, M., Lin, X., Gao, F., & Wang, D. (2026). Molecular Anchoring and Multiscale Porosity Synergize in 3D Printed Polyimide Composites for High-Temperature Thermal Management. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c16546

Vancouver

Wang S, Pang T, Yao Z, Li M, Zhang L, Gong M, et al. Molecular Anchoring and Multiscale Porosity Synergize in 3D Printed Polyimide Composites for High-Temperature Thermal Management. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c16546

BibTeX
@article{Wang2026,
  author = {Wang, Shixiao and Pang, Tianqi and Yao, Zhiyu and Li, Mutian and Zhang, Liang and Gong, Min and Lin, Xiang and Gao, Fengxian and Wang, Dongrui},
  title = {Molecular Anchoring and Multiscale Porosity Synergize in 3D Printed Polyimide Composites for High-Temperature Thermal Management},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  doi = {10.1021/acsami.6c16546}
}
Kostenlos starten →