Cyano-Functionalized p -Aramid Copolymer Fibers Enabling Intrinsic Rubber Adhesion for Electric-Vehicle Hose Reinforcement
ACS Applied Materials & Interfaces · 28.10.2026 · 18 (42) · 58344-58352
DOI: 10.1021/acsami.6c16408 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 15.10.2026. Verfasst von Juyoung Kim und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan44919, Republic of Korea. Die Arbeit nennt 54 Literaturangaben. Gefördert von: National Research Foundation of Korea.
Abstract (Originalsprache)
The transition to electric vehicles (EVs) has intensified durability demands on rubber hoses used for battery thermal management and coolant circulation, where para-aramid (p-aramid) fibers serve as the reinforcement of choice owing to their high strength, thermal stability, and chemical resistance. However, the chemically inert surface of p-aramid fibers necessitates a hazardous resorcinol-formaldehyde-latex treatment to achieve adequate rubber adhesion, raising environmental and processing concerns. Here, we report cyano-functionalized p-aramid copolymer (CN-pAC) fibers, synthesized by copolymerizing a cyano-functionalized monomer (3,4′-ODA-CN) into the aramid backbone via in situ polymerization. The cyano groups enhanced spinning-dope homogeneity and improved fiber drawability, yielding fibers with a tensile strength of 3.63 GPa and a modulus of 90.9 GPa. The surface-accessible cyano groups increased both the polar and dispersive components of surface energy, raising the total surface energy from 23.2 to 27.7 mJ m–2. Without any surface treatment, the interfacial shear strength increased from 2.96 to 4.66 MPa with polar ethylene acrylic elastomer (AEM) rubber and from 2.39 to 3.65 MPa with nonpolar silicone rubber. This enhanced adhesion shifted the failure mode of AEM rubber-impregnated strands from fiber pull-out to fiber fracture, boosting strand tensile strength from 0.92 to 1.38 GPa. These results establish a surface-treatment-free strategy for durable aramid–rubber composites in next-generation EV components.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Science and Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan44919, Republic of Korea.
- Department of Chemistry and Chemical Engineering, Education and Research Center for Smart Energy and Materials, Inha University, Incheon22212, Republic of Korea.
- Department of Organic Materials Engineering, Chungnam National University, Daejeon34134, Republic of Korea.
- Department of Organic and Nano Engineering, Human-Tech Convergence Program, Hanyang University, Seoul04763, Republic of Korea.
ORCID-Profile: Juyoung Kim, Youngho Eom, Han Gi Chae
Förderung
- National Research Foundation of Korea
Zitieren
APA
Kim, J., Kim, M. W., Lyu, J., Lee, D., Choi, H., Hwang, S., Jo, J., Lee, S. G., Youk, J. H., Eom, Y., & Chae, H. G. (2026). Cyano-Functionalized p -Aramid Copolymer Fibers Enabling Intrinsic Rubber Adhesion for Electric-Vehicle Hose Reinforcement. ACS Applied Materials & Interfaces, 18(42), 58344-58352. https://doi.org/10.1021/acsami.6c16408
Vancouver
Kim J, Kim MW, Lyu J, Lee D, Choi H, Hwang S, et al. Cyano-Functionalized p -Aramid Copolymer Fibers Enabling Intrinsic Rubber Adhesion for Electric-Vehicle Hose Reinforcement. ACS Applied Materials & Interfaces. 2026;18(42):58344-58352. doi:10.1021/acsami.6c16408
BibTeX
@article{Kim2026,
author = {Kim, Juyoung and Kim, Min Woo and Lyu, Jaegeun and Lee, Donghoon and Choi, Howon and Hwang, Sunjae and Jo, Junhyoung and Lee, Seung Goo and Youk, Ji Ho and Eom, Youngho and Chae, Han Gi},
title = {Cyano-Functionalized p -Aramid Copolymer Fibers Enabling Intrinsic Rubber Adhesion for Electric-Vehicle Hose Reinforcement},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {42},
pages = {58344--58352},
doi = {10.1021/acsami.6c16408}
}
EUVIMED