Triarm Polycaprolactone Interface for Spatially Controlled Functionalization of Carbon Nanotube Fibers
ACS Applied Materials & Interfaces · 13.11.2026
DOI: 10.1021/acsami.6c16323 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 13.11.2026. Verfasst von Irem Yasyerli und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Izmir Institute of Technology, Urla, Izmir35430, Türkiye. Die Arbeit nennt 39 Literaturangaben. Gefördert von: Türkiye Bilimsel ve Teknolojik Arastirma Kurumu, T?rkiye Bilimsel ve Teknolojik Arastirma Kurumu.
Abstract (Originalsprache)
Carbon nanotube fibers (CNTF) with exceptional strength, electrical, and thermal conductivities possess the potential for deployment in electrochemical and analytical applications. For such applications, CNTF are typically encapsulated using polymeric interface membranes such as polyvinyl chloride (PVC) for accommodating functional elements or recognition molecules. These membranes typically assemble stochastically on CNTF surfaces owing to the nonuniform interfacial interaction energies between the characteristic groups of the polymers and the CNTF surface. This stochastic assembly of encapsulating membranes subsequently inhibits the homogeneous distribution of recognition molecules on the CNTF surface, which influences the analytical performances. Herein, a triarm polycaprolactone (3-PCL) block copolymer is designed to homogenize the interfacial energies between the polymeric membranes and the CNTF surface. The 3-PCL interface is hypothesized to enable spatially controlled assembly of polymeric membranes on the CNTF surface and subsequently a homogeneous distribution of recognition molecules. As an illustration, the CNTF with a 3-PCL interface is demonstrated as an ion-selective microelectrode (ISE) for selective and sensitive detection of ammonium ions (NH4+) via homogeneous incorporation of a NH4+-specific ionophores within an encapsulating PVC membrane on the CNTF surface. An LOD and linear response range of 1 × 10–7 M and 1 × 10–7 to 1.0 × 10–1 M, respectively, were achieved. These values are an order higher as compared to ionophores incorporated within the PVC membrane on the CNTF surface without the 3-PCL interface. Further, a linear two-arm polymer (2-PCL) was evaluated as an interface for validation of significantly higher and stable analytical responses that could be achieved using the 3-PCL interface. Thus, the 3-PCL possesses the potential to be an ideal interface for incorporation of functional materials and recognition elements within polymeric membranes on the CNTF surface for the development of high-performance electrochemical and analytical devices.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemistry, Izmir Institute of Technology, Urla, Izmir35430, Türkiye.
- School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore639798, Singapore.
- Department of Photonics Science and Engineering , Izmir Institute of Technology , Urla, Izmir35430, Türkiye.
- Temasek Laboratories , Research Techno Plaza, 50 Nanyang Drive, Singapore637553, Singapore.
- School of Materials Science and Engineering, Nanyang Technological University, Singapore639798, Singapore.
- Center for Targeted Therapy Technologies, Boğaziçi University, Kandilli, Üsküdar, İstanbul34984, Türkiye.
ORCID-Profile: Zhi Kai Ng, Yagmur Bozkurt, Mehmet Yagmurcukardes, Edwin Hang Tong Teo, Ümit Hakan Yildiz
Förderung
- Türkiye Bilimsel ve Teknolojik Arastirma Kurumu
- T?rkiye Bilimsel ve Teknolojik Arastirma Kurumu
Zitieren
APA
Yasyerli, I., Ng, Z. K., Celik, A. I., Bozkurt, Y., Onder, A., Yagmurcukardes, M., Tsang, S. H., Palaniappan, A., Teo, E. H. T., & Yildiz, Ü. H. (2026). Triarm Polycaprolactone Interface for Spatially Controlled Functionalization of Carbon Nanotube Fibers. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c16323
Vancouver
Yasyerli I, Ng ZK, Celik AI, Bozkurt Y, Onder A, Yagmurcukardes M, et al. Triarm Polycaprolactone Interface for Spatially Controlled Functionalization of Carbon Nanotube Fibers. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c16323
BibTeX
@article{Yasyerli2026,
author = {Yasyerli, Irem and Ng, Zhi Kai and Celik, Arzu Irem and Bozkurt, Yagmur and Onder, Ahmet and Yagmurcukardes, Mehmet and Tsang, Siu Hon and Palaniappan, Alagappan and Teo, Edwin Hang Tong and Yildiz, Ümit Hakan},
title = {Triarm Polycaprolactone Interface for Spatially Controlled Functionalization of Carbon Nanotube Fibers},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
doi = {10.1021/acsami.6c16323}
}
EUVIMED