Solution-Processed, High-Performance, Transparent Near-Infrared Photodetectors Based on Ag x Te Colloidal Quantum Dot–Decorated SnO2 Channels
ACS Applied Materials & Interfaces · 28.10.2026 · 18 (42) · 57989-57996
DOI: 10.1021/acsami.6c16069 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 15.10.2026. Verfasst von Won-Yong Lee und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Electronic and Electrical Engineering, Kyungpook National University, Daegu41566, Korea. Die Arbeit nennt 38 Literaturangaben. Gefördert von: National Research Foundation of Korea.
Abstract (Originalsprache)
In this study, high-performance near-infrared (NIR) phototransistors were developed based on tin dioxide (SnO2) thin films decorated with AgxTe colloidal quantum dots (CQDs). The hybrid SnO2/AgxTe architecture was designed to overcome the intrinsic limitations imposed by the wide bandgap of SnO2, enabling NIR photodetection beyond its native absorption range. Structural and morphological characterizations confirmed the formation of polycrystalline SnO2 and the homogeneous dispersion of AgxTe CQDs across the film surface. Optical analyses revealed a significant reduction in the effective optical bandgap to ∼1.3 eV upon AgxTe CQD incorporation, accompanied by enhanced NIR absorption. Electrical measurements demonstrated that devices decorated with 0.3 and 0.5 wt % AgxTe CQDs exhibited strong NIR photoresponses. Notably, the device containing 0.3 wt % AgxTe achieved comparable or, for some metrics, superior performance, including detectivity (∼3.77 × 1011 Jones), responsivity, and photosensitivity, despite its lower CQD loading. The AgxTe CQDs were well distributed on the SnO2 films, occupying a relatively small surface area fraction. These findings indicate that optimized NIR photodetection can be achieved with a minimal quantum dot content, offering a promising route toward cost-effective, transparent, and high-performance phototransistor applications without compromising visible-range transparency.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Electronic and Electrical Engineering, Kyungpook National University, Daegu41566, Korea.
- The Institute of Electronic Technology, Kyungpook National University, Daegu41566, Republic of Korea.
- School of Electronics and Information Engineering, Korea Aerospace University, Goyang10540, Republic of Korea.
- School of Electrical and Electronic Engineering, Nanyang Technological University, 50 Nanyang Ave., Singapore639798, Singapore.
- School of Electronics Engineering, Kyungpook National University, Daegu41566, Korea.
ORCID-Profile: Munho Kim, Jin-Hyuk Bae, Jaewon Jang
Förderung
- National Research Foundation of Korea
Zitieren
APA
Lee, W. Y., Yoon, J., Kim, T., Kim, K., Kim, M., Bae, J. H., & Jang, J. (2026). Solution-Processed, High-Performance, Transparent Near-Infrared Photodetectors Based on Ag x Te Colloidal Quantum Dot–Decorated SnO2 Channels. ACS Applied Materials & Interfaces, 18(42), 57989-57996. https://doi.org/10.1021/acsami.6c16069
Vancouver
Lee WY, Yoon J, Kim T, Kim K, Kim M, Bae JH, et al. Solution-Processed, High-Performance, Transparent Near-Infrared Photodetectors Based on Ag x Te Colloidal Quantum Dot–Decorated SnO2 Channels. ACS Applied Materials & Interfaces. 2026;18(42):57989-57996. doi:10.1021/acsami.6c16069
BibTeX
@article{Lee2026,
author = {Lee, Won-Yong and Yoon, Jongmin and Kim, Taesu and Kim, Kwangeun and Kim, Munho and Bae, Jin-Hyuk and Jang, Jaewon},
title = {Solution-Processed, High-Performance, Transparent Near-Infrared Photodetectors Based on Ag x Te Colloidal Quantum Dot–Decorated SnO2 Channels},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {42},
pages = {57989--57996},
doi = {10.1021/acsami.6c16069}
}
EUVIMED