Geometry-Driven Ultrahigh Current Density Field Emission from Vertically Oriented MXene Film Edge Emitters
ACS Applied Materials & Interfaces · 12.11.2026
DOI: 10.1021/acsami.6c16050 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 12.11.2026. Verfasst von Si Eun Han und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan44919, Republic of Korea. Die Arbeit nennt 44 Literaturangaben. Gefördert von: National Research Foundation of Korea, Institute for Information and Communications Technology Promotion.
Abstract (Originalsprache)
MXenes are promising cold cathode materials owing to their high electrical conductivity, solution processability, and tunable surface terminations; however, realizing high-current-density field emission from MXene film emitters remains challenging because their planar two-dimensional geometry generally provides limited field concentration and restricts the number of field-activated emission sites. Here, we demonstrate a geometry-driven strategy to achieve high-current-density field emission from vertically oriented MXene film edge emitters. By systematically controlling the film height and inter-electrode gap, the optimized emitter achieves a current density of 5020 mA cm–2 at 1520 V, which is more than an order of magnitude higher than the values reported for previous MXene field emitters. Enhanced performance is not governed by the field enhancement factor alone. Instead, it is enabled by the balance between sufficient local field enhancement and a large effective emission area. Experimental Fowler–Nordheim analysis, emission pattern imaging, and the screening-corrected field-enhancement model indicate that excessive field concentration can promote edge-localized emission and reduce the effective emission area, whereas the optimized geometry enables distributed edge emission with improved stability. These findings establish edge-geometry engineering as a design principle for transforming two-dimensional MXene films into high-current-density cold cathodes for vacuum nanoelectronics.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Electrical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan44919, Republic of Korea.
- Department of Materials Science and Engineering and Graduate School of Semiconductor Materials and Device Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan44919, Republic of Korea.
ORCID-Profile: Soon-Yong Kwon, EunMi Choi
Förderung
- National Research Foundation of Korea
- Institute for Information and Communications Technology Promotion
Zitieren
APA
Han, S. E., Park, J., Kim, M., Lee, J. Y., Kwon, S. Y., & Choi, E. (2026). Geometry-Driven Ultrahigh Current Density Field Emission from Vertically Oriented MXene Film Edge Emitters. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c16050
Vancouver
Han SE, Park J, Kim M, Lee JY, Kwon SY, Choi E. Geometry-Driven Ultrahigh Current Density Field Emission from Vertically Oriented MXene Film Edge Emitters. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c16050
BibTeX
@article{Han2026,
author = {Han, Si Eun and Park, Jaeeun and Kim, Mincheal and Lee, Jun Yeop and Kwon, Soon-Yong and Choi, EunMi},
title = {Geometry-Driven Ultrahigh Current Density Field Emission from Vertically Oriented MXene Film Edge Emitters},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
doi = {10.1021/acsami.6c16050}
}
EUVIMED