EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Nanomechanics of MXene Flakes at Gold Interfaces

Pierluigi Bilotto iD, Sabine Schwarz iD, Marko Piljević iD, Iago Peters, Michael Stöger-Pollach iD, Carsten Gachot iD

ACS Applied Materials & Interfaces · 10.11.2026

DOI: 10.1021/acsami.6c15927 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 10.11.2026. Verfasst von Pierluigi Bilotto und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Engineering Design and Product Development, Research Unit of Tribology (E307-05), TU Wien, Lehargasse 6, 1060Vienna, Austria. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Gesellschaft für Forschungsförderung Niederösterreich, Österreichische Forschungsförderungsgesellschaft, ?sterreichische Forschungsf?rderungsgesellschaft.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The demand for novel self-powering and sustainable electronics requires major efforts in identifying new advanced materials for nano-applications. MXenes have gathered attention due to their electronic and mechanical properties; however, their nanomechanical compliance against a metal-like interface is still not clearly identified. In this work, we employ atomic force microscopy to characterize the nanomechanical properties of a self-assembled thin flake of titanium carbide MXene (Ti3C2Tx) against a gold probe. The investigation returns an interfacial shear stress of 399 MPa and the observation of nano-wear localized in the center of the MXene flake. Nevertheless, MXene flakes retained their crystallinity in the tribofilms, as confirmed by transmission electron microscopy and electron energy loss spectroscopy. The outcomes of this work set the basis for the use of Ti3C2Tx in novel nano harvesting systems involving metal (e.g., Au) interfaces with large scope in nanoelectronics, wearable sensing, electric vehicles, and robotics.

Schlagwörter

Stichwörter der Autor:innen

MXenefriction mapinterfacial self-assemblyinterfacial shear stressmetal interfacesnanomechanics

Autor:innen und Institutionen

  • Institute of Engineering Design and Product Development, Research Unit of Tribology (E307-05), TU Wien, Lehargasse 6, 1060Vienna, Austria.
  • University Service Center for Transmission Electron Microscopy, TU Wien, Stadionallee 2, 1020Vienna, Austria.
  • AC2T Research GmbH , Viktor-Kaplan-Straße 2/C, 2700Wiener Neustadt, Austria.
  • Institute of Applied Physics, E134-02, TU Wien, 1040Vienna, Austria.

ORCID-Profile: Pierluigi Bilotto, Sabine Schwarz, Marko Piljević, Michael Stöger-Pollach, Carsten Gachot

Förderung

  • Gesellschaft für Forschungsförderung Niederösterreich
  • Österreichische Forschungsförderungsgesellschaft
  • ?sterreichische Forschungsf?rderungsgesellschaft
  • Technische Universit?t Wien Bibliothek
  • Gesellschaft f?r Forschungsf?rderung Nieder?sterreich

Zitieren

APA

Bilotto, P., Schwarz, S., Piljević, M., Peters, I., Stöger-Pollach, M., & Gachot, C. (2026). Nanomechanics of MXene Flakes at Gold Interfaces. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c15927

Vancouver

Bilotto P, Schwarz S, Piljević M, Peters I, Stöger-Pollach M, Gachot C. Nanomechanics of MXene Flakes at Gold Interfaces. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c15927

BibTeX
@article{Bilotto2026,
  author = {Bilotto, Pierluigi and Schwarz, Sabine and Piljević, Marko and Peters, Iago and Stöger-Pollach, Michael and Gachot, Carsten},
  title = {Nanomechanics of MXene Flakes at Gold Interfaces},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  doi = {10.1021/acsami.6c15927}
}
Kostenlos starten →