EUVIMEDEUVIMED entdecken
Crossref

N-Doped Mesoporous Carbon Film with Pinned Carbon Nanotube as Free-Standing Anode for Fast-Charging Li-Ion Batteries

Ming Chen iD, Wen-Li Shi, Yu-Fang Li, Yuan-Yuan Yang, Rong Wan, Xing Zhang iD, Xing Qian iD, Zhong-Yong Yuan iD, Chun-Sheng Li

ACS Applied Materials & Interfaces · 06.11.2026

DOI: 10.1021/acsami.6c15865 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 06.11.2026. Verfasst von Ming Chen und 8 weiteren Autor:innen. Beteiligte Einrichtung: College of Chemistry and Chemical Engineering, Xinyang Normal University, Xinyang464000, China. Die Arbeit nennt 69 Literaturangaben. Gefördert von: Natural Science Foundation of Henan Province, Nanhu Scholars Program for Young Scholars of Xinyang Normal University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A N-doped mesoporous carbon film with a pinned carbon nanotube was prepared by a hydrothermal soft-template self-assembly and metal-catalyzed graphitization approach, using phenolic resin/dicyandiamide as the solid carbon and nitrogen sources and F127 micelles as a mesoporous template. The thickness of the mesoporous carbon membrane was determined by the polymerization degree of phenolic resin and was adjustable by tuning the reagent concentration in the hydrothermal reaction. These NMCF-NCNT films show a high graphitization degree, large specific surface area, rich nitrogen dopant, and high mechanical strength. Importantly, the NCNT grown on the mesoporous carbon film constructs a conductive pathway between the carbon film and coin cell, and the mesopores in NMCF accelerate the electrolyte diffusion when NMCF-NCNT films are applied as free-standing anodes in LiBs. The NMCF-NCNT-1 with a thickness of 1 μm delivered the optimum electrochemical properties of 750 mAh g–1 at 0.1 A g–1, 578 mAh g–1 at 5 A g–1 after 30 cycles, and 661 mAh g–1 at 1 A g–1 after 600 cycles. Such good electrochemical performance could be attributed to the thinnest NMCF-NCNT-1 membrane granting high electrical conductivity, fast Li+ diffusion, and preeminent structural stabilization. This work aims at the preparation of a self-supporting-structured mesoporous carbon film with pinned carbon nanotube, the regulation of micro-nanostructure, and the optimization of electrochemical performance, which may gain a new insight into the design of free-standing carbon membrane electrodes for fast-charging LiBs.

Schlagwörter

Stichwörter der Autor:innen

anodecarbon nanotubefree-standing structurelithium-ion batterymesoporous carbon film

Autor:innen und Institutionen

  • College of Chemistry and Chemical Engineering, Xinyang Normal University, Xinyang464000, China.
  • College of Chemistry and Materials, Jiangxi Agricultural University, Nanchang330045, China.
  • School of Materials Science and Engineering, Nankai University, Tianjin300071, China.
  • School of Chemistry and Life Sciences, Suzhou University of Science and Technology, Suzhou215009, China.

ORCID-Profile: Ming Chen, Xing Zhang, Xing Qian, Zhong-Yong Yuan

Förderung

  • Natural Science Foundation of Henan Province
  • Nanhu Scholars Program for Young Scholars of Xinyang Normal University

Zitieren

APA

Chen, M., Shi, W. L., Li, Y. F., Yang, Y. Y., Wan, R., Zhang, X., Qian, X., Yuan, Z. Y., & Li, C. S. (2026). N-Doped Mesoporous Carbon Film with Pinned Carbon Nanotube as Free-Standing Anode for Fast-Charging Li-Ion Batteries. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c15865

Vancouver

Chen M, Shi WL, Li YF, Yang YY, Wan R, Zhang X, et al. N-Doped Mesoporous Carbon Film with Pinned Carbon Nanotube as Free-Standing Anode for Fast-Charging Li-Ion Batteries. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c15865

BibTeX
@article{Chen2026,
  author = {Chen, Ming and Shi, Wen-Li and Li, Yu-Fang and Yang, Yuan-Yuan and Wan, Rong and Zhang, Xing and Qian, Xing and Yuan, Zhong-Yong and Li, Chun-Sheng},
  title = {N-Doped Mesoporous Carbon Film with Pinned Carbon Nanotube as Free-Standing Anode for Fast-Charging Li-Ion Batteries},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  doi = {10.1021/acsami.6c15865}
}
Kostenlos starten →