EUVIMEDEUVIMED entdecken
Crossref

Nanoscale Interfacial Engineering of Printable Polysaccharide Hydrogels for Simultaneous High Porosity and Wet-State Mechanical Robustness

Baoqiang Zhang iD, Yantang Zhao, Yueyan Zheng, Xingyi Zhang iD, Qiangqiang Zhang iD

ACS Applied Materials & Interfaces · 16.11.2026

DOI: 10.1021/acsami.6c15794 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 16.11.2026. Verfasst von Baoqiang Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Mechanics on Disaster and Environment in Western China (Lanzhou University), The Ministry of Education of China, Lanzhou730000, P. …. Die Arbeit nennt 53 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Ministry of Science and Technology of the People's Republic of China, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Direct ink writing (DIW) provides a promising route to fabricate porous hydrogel constructs with programmable architectures, yet highly hydrated printed networks often suffer from swelling-induced softening and structural instability under wet conditions. Herein, we report a nanoscale interfacial engineering strategy for DIW of mechanically robust, hierarchically porous polysaccharide hydrogels. Purified silanol-rich silica-fume nanoparticles were incorporated into a sodium alginate/chitosan polyelectrolyte ink, followed by printing, freeze-drying, and sequential acetic acid/Ca2+ crosslinking. The resulting SCS hydrogels showed well-preserved printed architectures, interconnected pore networks, and homogeneous silica distribution. Silica–polysaccharide hydrogen-bonding interfaces, SA/CS polyelectrolyte complexation, and Ca2+-mediated alginate crosslinking jointly formed a constrained multilevel network that suppressed swelling-induced structural loosening. Consequently, the SCS hydrogels maintained porosity above 90%, reduced equilibrium swelling by approximately 70% compared with the single-network control, and achieved a wet-state compressive modulus of 913 kPa through combined nanoscale interfacial reinforcement and programmable printed architecture, while exhibiting good structural recovery under cyclic deformation. In vitro evaluations further indicated favorable cytocompatibility and osteogenesis-related cellular responses, supporting further evaluation of SCS hydrogels as mechanically stable printable bio-based scaffolds for bone-tissue-engineering-related applications. This work demonstrates a DIW-compatible nanoscale interfacial design strategy for decoupling high porosity from swelling-induced softening and wet-state mechanical deterioration, providing a useful structure–property-processing design framework for structurally stable porous hydrogel materials.

Schlagwörter

Stichwörter der Autor:innen

anti-swellingdirect ink writinghierarchical porositynanoscale interfacial engineeringprintable polysaccharide hydrogelswet-state mechanical robustness

Autor:innen und Institutionen

  • Key Laboratory of Mechanics on Disaster and Environment in Western China (Lanzhou University), The Ministry of Education of China, Lanzhou730000, P. R. China.
  • School of Civil Engineering and Mechanics, Lanzhou University, Lanzhou730000, P. R. China.

ORCID-Profile: Baoqiang Zhang, Xingyi Zhang, Qiangqiang Zhang

Förderung

  • National Natural Science Foundation of China
  • Ministry of Science and Technology of the People's Republic of China
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Zhang, B., Zhao, Y., Zheng, Y., Zhang, X., & Zhang, Q. (2026). Nanoscale Interfacial Engineering of Printable Polysaccharide Hydrogels for Simultaneous High Porosity and Wet-State Mechanical Robustness. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c15794

Vancouver

Zhang B, Zhao Y, Zheng Y, Zhang X, Zhang Q. Nanoscale Interfacial Engineering of Printable Polysaccharide Hydrogels for Simultaneous High Porosity and Wet-State Mechanical Robustness. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c15794

BibTeX
@article{Zhang2026,
  author = {Zhang, Baoqiang and Zhao, Yantang and Zheng, Yueyan and Zhang, Xingyi and Zhang, Qiangqiang},
  title = {Nanoscale Interfacial Engineering of Printable Polysaccharide Hydrogels for Simultaneous High Porosity and Wet-State Mechanical Robustness},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  doi = {10.1021/acsami.6c15794}
}
Kostenlos starten →