Flexible Phase Change Adhesive Allowing Tunable Melting Point for Flexible Electronics Thermal Management with Controlled Adhesion
ACS Applied Materials & Interfaces · 06.11.2026
DOI: 10.1021/acsami.6c15583 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 06.11.2026. Verfasst von Jianfeng Liu und 1 weiteren Autor:innen. Beteiligte Einrichtung: South China Advanced Institute for Soft Matter Science and Technology, School of Emergent Soft Matter, South China University of Technology, Guangzho…. Die Arbeit nennt 55 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Higher Education Discipline Innovation Project, Recruitment Program of Guangdong.
Abstract (Originalsprache)
Currently, flexible phase-change materials that have been widely investigated for flexible electronics typically exhibit melting points below 60 °C and lack intrinsic interfacial adhesion. These limitations render them inadequate for thermal management under bending, twisting, and other mechanical deformations encountered in flexible devices. To overcome these constraints, we developed a strategy in which novel urea-based phase-change materials (PCMs) were incorporated in situ into a polyacrylate matrix via a solvent-free UV-curing process, thereby constructing a flexible phase-change adhesive (FPCA) that combines strong interfacial adhesion with a tunable melting point covering 60–100 °C. The optimized FPCA formulation (E90A10-H6U-40 wt %) achieves an exceptional combination of properties: high flexibility (tensile strength: 0.44 MPa; elongation at break: 1227%), melt point (74.2 °C), reliable phase change enthalpy (53.4 J/g), strong adhesion (180° peel force: 5.5 N/25 mm at phase-transition temperature), folding endurance exceeding 200 000 cycles, and stable performance after accelerated aging (85 °C/85% Relative Humidity for 168 h). The FPCA series also enables controlled thermal debonding with debonding ratios exceeding 99%, supporting temporary bonding and non-destructive device recycling. This work substantially broadens the material landscape for flexible thermal management and offers a promising pathway toward next-generation, wearable-compatible electronic devices.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- South China Advanced Institute for Soft Matter Science and Technology, School of Emergent Soft Matter, South China University of Technology, Guangzhou510640, China.
- Guangdong Provincial Key Laboratory of Functional and Intelligent Hybrid Materials and Devices, South China University of Technology, Guangzhou510640, China.
- Guangdong Basic Research Center of Excellence for Energy and Information Polymer Materials, South China University of Technology, Guangzhou510640, China.
ORCID-Profile: Jianfeng Liu, Jianhui Xia
Förderung
- National Natural Science Foundation of China
- Higher Education Discipline Innovation Project
- Recruitment Program of Guangdong
- Guangdong Provincial Key Laboratory of Functional and Intelligent Hybrid Materials and Devices
Zitieren
APA
Liu, J., & Xia, J. (2026). Flexible Phase Change Adhesive Allowing Tunable Melting Point for Flexible Electronics Thermal Management with Controlled Adhesion. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c15583
Vancouver
Liu J, Xia J. Flexible Phase Change Adhesive Allowing Tunable Melting Point for Flexible Electronics Thermal Management with Controlled Adhesion. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c15583
BibTeX
@article{Liu2026,
author = {Liu, Jianfeng and Xia, Jianhui},
title = {Flexible Phase Change Adhesive Allowing Tunable Melting Point for Flexible Electronics Thermal Management with Controlled Adhesion},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
doi = {10.1021/acsami.6c15583}
}
EUVIMED