EUVIMEDEUVIMED entdecken
Crossref

Bromide-Rich Phase Enhances the Photovoltaic Performance in Fabricating the Hybrid Wide-Bandgap Perovskite-Based Solar Cells

Qirui He, Xiyu Chen, Yawen Xu, Zhiyu Wang iD, Minghao Zhou, Yu He, Peiyao Wang, Ziyi Xu, Peiqi Ji, Hong-Ling Cai iD, Xiaoshan Wu iD

ACS Applied Materials & Interfaces · 16.11.2026

DOI: 10.1021/acsami.6c15560 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 16.11.2026. Verfasst von Qirui He und 10 weiteren Autor:innen. Beteiligte Einrichtung: National Laboratory of Solid State Microstructures, Department of Physics, Nanjing University, Nanjing210093, China. Die Arbeit nennt 64 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nowadays, high-performance tandem solar cells may be fabricated by connecting the organic–inorganic hybrid wide-bandgap (WBG) halide perovskite film-based solar cells (PSCs) with the silicon-based one. The major challenge for both academia and industry is the performance of the WBG-based solar cell. Here, to improve the efficiency and stability of WBG PSCs, ethylenediammonium halides are designed to passivate and exclude the defects in fabricating the WBG-based solar cells. Ethylenediammonium bromide forms a Br-rich phase, which not only passivates surface defects but also suppresses light-induced phase segregation, thereby improving the performance of WBG mixed-halide PSCs. The champion PSCs achieve an open-circuit voltage of 1.255 V, a fill factor of 84.12%, and a power conversion efficiency (PCE) of 23.64%. Device stability is also markedly enhanced, with 99.6% of the initial PCE retained after 1728 h under ISOS-D-1I conditions and a T80 lifetime of 1020 h under ISOS-T-1I conditions. This work provides a new insight into optimization strategies for mixed-halide WBG perovskites.

Schlagwörter

Stichwörter der Autor:innen

bromide-rich surface phaseethylenediamine halideshalide anionswide-bandgap perovskite

Autor:innen und Institutionen

  • National Laboratory of Solid State Microstructures, Department of Physics, Nanjing University, Nanjing210093, China.
  • Department of Electronic and Electrical Engineering, Southern University of Science and Technology, Shenzhen518055, China.
  • Institute of Materials Engineering, Nantong226019, China.

ORCID-Profile: Zhiyu Wang, Hong-Ling Cai, Xiaoshan Wu

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Jiangsu Province

Zitieren

APA

He, Q., Chen, X., Xu, Y., Wang, Z., Zhou, M., He, Y., Wang, P., Xu, Z., Ji, P., Cai, H. L., & Wu, X. (2026). Bromide-Rich Phase Enhances the Photovoltaic Performance in Fabricating the Hybrid Wide-Bandgap Perovskite-Based Solar Cells. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c15560

Vancouver

He Q, Chen X, Xu Y, Wang Z, Zhou M, He Y, et al. Bromide-Rich Phase Enhances the Photovoltaic Performance in Fabricating the Hybrid Wide-Bandgap Perovskite-Based Solar Cells. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c15560

BibTeX
@article{He2026,
  author = {He, Qirui and Chen, Xiyu and Xu, Yawen and Wang, Zhiyu and Zhou, Minghao and He, Yu and Wang, Peiyao and Xu, Ziyi and Ji, Peiqi and Cai, Hong-Ling and Wu, Xiaoshan},
  title = {Bromide-Rich Phase Enhances the Photovoltaic Performance in Fabricating the Hybrid Wide-Bandgap Perovskite-Based Solar Cells},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  doi = {10.1021/acsami.6c15560}
}
Kostenlos starten →