EUVIMEDEUVIMED entdecken
Crossref

Sustainable Thermoplastic Thermal Interface Adhesive Derived from Poly(lipoic acid) and Boron Nitride for Efficient Electronic Thermal Management

Shuichang Chen, Yuchen Zhang, Yue Lin, Peng Ni iD, Yan Fang, Yunxiang Weng iD, Qinhui Chen iD, Haiqing Liu iD

ACS Applied Materials & Interfaces · 04.11.2026 · 18 (43) · 59932-59942

DOI: 10.1021/acsami.6c15377 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 23.10.2026. Verfasst von Shuichang Chen und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Chemistry and Materials Science, Fujian Key Laboratory of Polymer Materials, Fujian Normal University, Fuzhou, Fujian350007, China. Die Arbeit nennt 43 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fujian Province Science and Technology Planning Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The escalating power density of electronics demands thermal interface materials (TIMs) that simultaneously offer high thermal conductivity, strong adhesion, and environmental sustainability. Conventional thermally conductive adhesives (TCAs) face inherent trade-offs among these properties, often relying on non-recyclable thermosets. Here, we present a sustainable thermoplastic TCA composed of a poly(lipoic acid) (polyLA)-based dynamic polymer matrix integrated with polyvinylpyrrolidone-modified hexagonal boron nitride (BN@PVP). The polyLA matrix incorporates catechol moieties and reversible Fe3+-carboxyl/catechol coordination bonds, creating a dynamically reconfigurable network. This design yields an adhesive (LD50Fe100) with high toughness (1.52 MJ m–3), and strong lap shear adhesion (884 kPa on PMMA and 1210 kPa on steel). The dynamic bonds enable room-temperature self-healing (93.1% efficiency) and robust recyclability. At a BN@PVP loading of 40 wt %, the composite (BN@LD50Fe100) achieves a thermal conductivity of 1.2 W m–1 K–1 while maintaining enhanced mechanical properties. LED chip heat dissipation experiments demonstrate a 4 °C lower operating temperature compared to devices without a TIM, with stable thermal performance over multiple cycles. This work provides a promising material strategy to overcome the traditional trade-offs in TCAs, offering a path toward repairable, reusable, and efficient thermal management solutions for advanced electronic packaging.

Schlagwörter

Stichwörter der Autor:innen

adhesivelipoic acidrecyclabilitysolvent-freethermoplastic

Autor:innen und Institutionen

  • College of Chemistry and Materials Science, Fujian Key Laboratory of Polymer Materials, Fujian Normal University, Fuzhou, Fujian350007, China.

ORCID-Profile: Peng Ni, Yunxiang Weng, Qinhui Chen, Haiqing Liu

Förderung

  • National Natural Science Foundation of China
  • Fujian Province Science and Technology Planning Project

Zitieren

APA

Chen, S., Zhang, Y., Lin, Y., Ni, P., Fang, Y., Weng, Y., Chen, Q., & Liu, H. (2026). Sustainable Thermoplastic Thermal Interface Adhesive Derived from Poly(lipoic acid) and Boron Nitride for Efficient Electronic Thermal Management. ACS Applied Materials & Interfaces, 18(43), 59932-59942. https://doi.org/10.1021/acsami.6c15377

Vancouver

Chen S, Zhang Y, Lin Y, Ni P, Fang Y, Weng Y, et al. Sustainable Thermoplastic Thermal Interface Adhesive Derived from Poly(lipoic acid) and Boron Nitride for Efficient Electronic Thermal Management. ACS Applied Materials & Interfaces. 2026;18(43):59932-59942. doi:10.1021/acsami.6c15377

BibTeX
@article{Chen2026,
  author = {Chen, Shuichang and Zhang, Yuchen and Lin, Yue and Ni, Peng and Fang, Yan and Weng, Yunxiang and Chen, Qinhui and Liu, Haiqing},
  title = {Sustainable Thermoplastic Thermal Interface Adhesive Derived from Poly(lipoic acid) and Boron Nitride for Efficient Electronic Thermal Management},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {43},
  pages = {59932--59942},
  doi = {10.1021/acsami.6c15377}
}
Kostenlos starten →