Enhanced Performance of Protonic Ceramic Electrolysis Cells via Transient Sinterlayer Engineering
ACS Applied Materials & Interfaces · 04.11.2026 · 18 (43) · 59478-59490
DOI: 10.1021/acsami.6c14586 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 23.10.2026. Verfasst von Peter W Rand und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Colorado School of Mines, Golden, Colorado80401, United States. Die Arbeit nennt 38 Literaturangaben. Gefördert von: U.S. Department of Energy.
Abstract (Originalsprache)
Protonic ceramic electrolysis cells (PCECs) are a promising technology for efficient hydrogen production at intermediate temperatures (500–600 °C), but their commercialization is hindered by fabrication challenges. In particular, the high-temperature sintering required to densify barium cerate–zirconate electrolytes promotes barium volatilization, leading to phase decomposition and degraded performance. Here, we introduce a transient sinterlayer processing strategy in which a thin (∼1 μm) surface coating is applied atop the electrolyte before sintering. During high-temperature processing, the sinterlayer suppresses electrolyte decomposition, promotes densification and grain growth, and is ultimately incorporated into the perovskite lattice, yielding a chemically uniform perovskite electrolyte. Three sinterlayer compositions (CeO2, La2O3, and La2Ce2O7) were evaluated for BaCe0.7Zr0.1Y0.1Yb0.1O3–δ electrolytes. La2O3 provided the greatest benefit by enhancing grain growth, preserving dopant distributions, and substantially improving stability upon exposure to boiling water, although degradation under CO2-containing conditions at 550 °C remained evident. Integrated into complete electrolysis cells, La2O3 sinterlayers increased current density by 67.2% at 1.3 V and 600 °C while improving Faradaic efficiency from 78.8 to 85.0% relative to a bare cell. These results establish transient sinterlayers as an effective fabrication strategy for high-performance PCECs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, Colorado School of Mines, Golden, Colorado80401, United States.
- Department of Metallurgical and Materials Engineering, Colorado School of Mines, Golden, Colorado80401, United States.
- Shared Instrumentation Facility, Colorado School of Mines, Golden, Colorado80401, United Staes.
ORCID-Profile: Peter W Rand, Philip Yox, Sandrine Ricote, Ryan P O'Hayre
Förderung
- U.S. Department of Energy
Zitieren
APA
Rand, P. W., Kim, Y., Yox, P., Sullivan, N. P., Ricote, S., & O'Hayre, R. P. (2026). Enhanced Performance of Protonic Ceramic Electrolysis Cells via Transient Sinterlayer Engineering. ACS Applied Materials & Interfaces, 18(43), 59478-59490. https://doi.org/10.1021/acsami.6c14586
Vancouver
Rand PW, Kim Y, Yox P, Sullivan NP, Ricote S, O'Hayre RP. Enhanced Performance of Protonic Ceramic Electrolysis Cells via Transient Sinterlayer Engineering. ACS Applied Materials & Interfaces. 2026;18(43):59478-59490. doi:10.1021/acsami.6c14586
BibTeX
@article{Rand2026,
author = {Rand, Peter W and Kim, Youdong and Yox, Philip and Sullivan, Neal P and Ricote, Sandrine and O'Hayre, Ryan P},
title = {Enhanced Performance of Protonic Ceramic Electrolysis Cells via Transient Sinterlayer Engineering},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {43},
pages = {59478--59490},
doi = {10.1021/acsami.6c14586}
}
EUVIMED