Machine-Learning-Driven Simulations of Hyperthermal Atomic Oxygen Impacts on (0001) Al2O3 for Low-Altitude Satellite Design
ACS Applied Materials & Interfaces · 11.11.2026 · 18 (44) · 61513-61530
DOI: 10.1021/acsami.6c14110 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 08.10.2026. Verfasst von Nico Segreto und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Theoretical Chemistry, University of Stuttgart, Pfaffenwaldring 55, Stuttgart70569, Germany. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Research Council (DFG).
Abstract (Originalsprache)
In Very Low Earth Orbit (VLEO), spacecraft encounter residual atmosphere primarily composed of atomic oxygen (AO). The drag and operational lifetime of these spacecraft are determined by the interaction between AO and the surface, which for aluminum is a passivation layer of Al2O3. We present a blueprint for developing machine-learned interatomic potentials for reactive gas-surface systems. Gaussian-Moment Neural Networks, implemented in apax, are trained using an active learning workflow that incorporates a spin-state switching scheme. This approach accounts for the triplet-to-singlet transition that AO undergoes upon adsorption, a process usually neglected in machine-learned potential studies. This methodology enables the simulation of thousands of hyperthermal impacts on (0001) Al2O3 at orbital velocity with near-first-principles accuracy for systems four times larger and four orders of magnitude cheaper than ab initio molecular dynamics. Alumina is not an inert surface. Most impacting atoms adsorb rather than reflect, and with continuous exposure, the surface reaches a dynamic steady state where ∼14% of the binding sites are occupied. The surface remains intact. Atoms desorb primarily as O2 formed by recombination, indicating that surface chemistry, rather than simple scattering, governs the energy transfer during impact. Conventional spacecraft drag models assume that impacting atoms desorb thermally in equilibrium with the surface. Our findings demonstrate that this assumption is invalid for alumina. We determine an energy accommodation coefficient of 0.61, which is lower than the 0.82 to 1.0 range measured on actual spacecraft surfaces. This discrepancy quantifies the effect of technical surface roughness. When scaling the simulated momentum transfer to the European Space Agency’s GOCE satellite, the measured reentry drag force is reproduced within a factor of 1.8. Since an atomically smooth surface still exhibits strong energy accommodation through chemical bond formation, effective drag reduction in VLEO requires materials that are both atomically smooth and chemically inert.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute for Theoretical Chemistry, University of Stuttgart, Pfaffenwaldring 55, Stuttgart70569, Germany.
- Institute of Aerodynamics and Gas Dynamics, University of Stuttgart, Wankelstraße 3, Stuttgart70563, Germany.
ORCID-Profile: Nico Segreto, Jovan Boskovic, Andrea Beck, Johannes Kästner
Förderung
- German Research Council (DFG)
Zitieren
APA
Segreto, N., Boskovic, J., Beck, A., & Kästner, J. (2026). Machine-Learning-Driven Simulations of Hyperthermal Atomic Oxygen Impacts on (0001) Al2O3 for Low-Altitude Satellite Design. ACS Applied Materials & Interfaces, 18(44), 61513-61530. https://doi.org/10.1021/acsami.6c14110
Vancouver
Segreto N, Boskovic J, Beck A, Kästner J. Machine-Learning-Driven Simulations of Hyperthermal Atomic Oxygen Impacts on (0001) Al2O3 for Low-Altitude Satellite Design. ACS Applied Materials & Interfaces. 2026;18(44):61513-61530. doi:10.1021/acsami.6c14110
BibTeX
@article{Segreto2026,
author = {Segreto, Nico and Boskovic, Jovan and Beck, Andrea and Kästner, Johannes},
title = {Machine-Learning-Driven Simulations of Hyperthermal Atomic Oxygen Impacts on (0001) Al2O3 for Low-Altitude Satellite Design},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {44},
pages = {61513--61530},
doi = {10.1021/acsami.6c14110}
}
EUVIMED