EUVIMEDEUVIMED entdecken
Crossref

Biomimetic Design of Photothermal Superhydrophobic Surfaces with Robust Mechanical Stability and Self-defrosting/Deicing Performance

Haipeng Wang, Qijie Zhou, Shangsheng Wang, Zhenlin Li, Qingjun Zhou, Shaomin Li iD, Wu Duan, Zhongjing Ren, Ziran Wang, Yingchun Guan, Peng Yan iD

ACS Applied Materials & Interfaces · 11.11.2026 · 18 (44) · 61486-61500

DOI: 10.1021/acsami.6c13619 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 12.08.2026. Verfasst von Haipeng Wang und 10 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of High-Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan250061, P.R. C…. Die Arbeit nennt 75 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Basic Research Program of Jiangsu Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Superhydrophobic surfaces have attracted extensive attention due to their unique nonwettability and good anti-icing/deicing potential but often experience significant performance degradation due to poor mechanical robustness and low humidity tolerance. Here, we developed a composite architecture (M-PNPs-T) by integrating a honeycomb-inspired thin-walled metallic frame into a polydimethylsiloxane (PDMS)-based matrix with the photothermal superhydrophobic (PNPs-T) surface, where the superhydrophobic property was achieved through laser-fabricating hierarchical micro/nanostructures on PNPs-T and the metallic frame acted as an ‘armor’ to protect the superhydrophobic PNPs-T surface from potential damage. This design allowed the PNPs-T surface to remain superhydrophobicity even after the M-PNPs-T surface underwent mechanical abrasion against a 600 grit SiC sandpaper for 1100 m at a pressure of 2.65 kPa. The composite M-PNPs-T surface exhibited good self-defrosting and self-deicing performance under both large temperature-difference (–14 ± 0.5 to 26 ± 0.5 °C) and low-temperature (–14 ± 0.5 °C) conditions. Particularly, the frost layer and the ice droplets formed on the M-PNPs-T surface completely melted after light irradiation for merely 60 and 186 s, respectively. The melted droplets easily slid off the M-PNPs-T surface under gravity with the help of lubrication and guidance provided by a thin water layer on the metallic frame surface. Moreover, the superior photothermal conversion performance of PNPs-T enabled the M-PNPs-T surface to maintain a high temperature (>22 °C) so as to exhibit good anti-icing/frosting properties under a low-temperature environment. Our design strategy provides an effective and facile route to prepare photothermal superhydrophobic surfaces with robust stability for potential deicing/defrosting applications.

Schlagwörter

Stichwörter der Autor:innen

M-PNPs-T surfacemechanical stabilityphotothermal conversionself-defrosting/deicingsuperhydrophobic

Autor:innen und Institutionen

  • Key Laboratory of High-Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan250061, P.R. China.
  • State Key Laboratory of Advanced Equipment and Technology for Metal Forming, Shandong University, Jinan250061, P.R. China.
  • Suzhou Research Institute, Shandong University, Suzhou215123, P.R. China.
  • Capital Aerospace Machinery Co., Ltd., 2 Jingbei East Road, Beijing100076, P.R. China.
  • Institute of Aerospace Special Materials and Processing Technology, HIWING Technology Academy of CASIC, Beijing100074, P.R. China.
  • Department of Endocrinology, Qilu Hospital of Shandong University, Jinan250012, P.R. China.

ORCID-Profile: Shaomin Li, Peng Yan

Förderung

  • National Natural Science Foundation of China
  • Basic Research Program of Jiangsu Province

Zitieren

APA

Wang, H., Zhou, Q., Wang, S., Li, Z., Zhou, Q., Li, S., Duan, W., Ren, Z., Wang, Z., Guan, Y., & Yan, P. (2026). Biomimetic Design of Photothermal Superhydrophobic Surfaces with Robust Mechanical Stability and Self-defrosting/Deicing Performance. ACS Applied Materials & Interfaces, 18(44), 61486-61500. https://doi.org/10.1021/acsami.6c13619

Vancouver

Wang H, Zhou Q, Wang S, Li Z, Zhou Q, Li S, et al. Biomimetic Design of Photothermal Superhydrophobic Surfaces with Robust Mechanical Stability and Self-defrosting/Deicing Performance. ACS Applied Materials & Interfaces. 2026;18(44):61486-61500. doi:10.1021/acsami.6c13619

BibTeX
@article{Wang2026,
  author = {Wang, Haipeng and Zhou, Qijie and Wang, Shangsheng and Li, Zhenlin and Zhou, Qingjun and Li, Shaomin and Duan, Wu and Ren, Zhongjing and Wang, Ziran and Guan, Yingchun and Yan, Peng},
  title = {Biomimetic Design of Photothermal Superhydrophobic Surfaces with Robust Mechanical Stability and Self-defrosting/Deicing Performance},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {44},
  pages = {61486--61500},
  doi = {10.1021/acsami.6c13619}
}
Kostenlos starten →