Sucrose-Assisted Interface Engineering of Boron Nitride for BT-Based High-Frequency Electronic Packaging Substrates with Low Dielectric Loss and Enhanced Thermal Conductivity
ACS Applied Materials & Interfaces · 09.09.2026 · 18 (35) · 48273-48285
DOI: 10.1021/acsami.6c13616 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 31.08.2026. Verfasst von Hao Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: National Engineering Research Center of Electromagnetic Radiation Control Materials, University of Electronic Science and Technology of China, Chengd…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 54 Literaturangaben.
Abstract (Originalsprache)
The rapid evolution of high-frequency communication, heterogeneous integration, and high-power-density packaging technologies has imposed increasingly stringent requirements for low-loss signal transmission and efficient heat dissipation on polymer-based packaging substrates. Herein, a BN interfacial engineering strategy combining sucrose-assisted mechanochemical activation with silane coupling was developed, and the resulting functionalized BN (f-BN) and SiO2 were incorporated as hybrid fillers into glass fiber fabric-reinforced bismaleimide-triazine (BT) resin composites. The results reveal that sucrose-assisted ball milling generated a hydroxyl-rich active layer on the BN surface, enabling the subsequent grafting of phenylamino silane and thereby improving the dispersion and interfacial bonding of f-BN within the composites. With the partial replacement of SiO2 by thermally conductive f-BN, the f-BN45 composite achieved an extremely low dielectric loss (Df) of 0.003 at 10 GHz and a through-plane thermal conductivity of 1.53 W m–1 K–1, which was 86.9% higher than that of the composite filled only with SiO2. In addition to its low Df and enhanced heat-conduction capability, f-BN45 also exhibited improved dimensional stability of the composites, as reflected by an X-axis CTE of 7.2 ppm/°C, while maintaining stable dielectric performance over a wide temperature range. Practical power device heat-dissipation evaluation and finite element simulations further confirmed the advantage of f-BN45 in chip thermal management. This work highlights sucrose-assisted surface activation combined with silane coupling as an effective route to tailoring the BN/resin interface, offering a feasible paradigm for high-performance BT-based composites in high-frequency electronic packaging and thermal management applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- National Engineering Research Center of Electromagnetic Radiation Control Materials, University of Electronic Science and Technology of China, Chengdu610054, China.
- State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu610054, China.
- City University of Hong Kong (Dongguan), Dongguan523808, China.
Zitieren
APA
Wang, H., He, Y., Luo, K., Li, E., Tang, B., & Yuan, Y. (2026). Sucrose-Assisted Interface Engineering of Boron Nitride for BT-Based High-Frequency Electronic Packaging Substrates with Low Dielectric Loss and Enhanced Thermal Conductivity. ACS Applied Materials & Interfaces, 18(35), 48273-48285. https://doi.org/10.1021/acsami.6c13616
Vancouver
Wang H, He Y, Luo K, Li E, Tang B, Yuan Y. Sucrose-Assisted Interface Engineering of Boron Nitride for BT-Based High-Frequency Electronic Packaging Substrates with Low Dielectric Loss and Enhanced Thermal Conductivity. ACS Applied Materials & Interfaces. 2026;18(35):48273-48285. doi:10.1021/acsami.6c13616
BibTeX
@article{Wang2026,
author = {Wang, Hao and He, Yuxin and Luo, Kang and Li, Enzhu and Tang, Bin and Yuan, Ying},
title = {Sucrose-Assisted Interface Engineering of Boron Nitride for BT-Based High-Frequency Electronic Packaging Substrates with Low Dielectric Loss and Enhanced Thermal Conductivity},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {35},
pages = {48273--48285},
doi = {10.1021/acsami.6c13616}
}
EUVIMED