EUVIMEDEUVIMED entdecken
Crossref

Sequential-Photocuring-Assisted Transformation of Planar Multilayer Structures into Curved Geometries

Daihyun Hwang, Jeonghyo Lee, Yeonseo Lee iD, Yougyoung Lee, Sungjun Han, Hosun Lim iD, Jung Ah Lim iD, Heesuk Kim iD, Wonbin Hong, Min Sang Kwon iD

ACS Applied Materials & Interfaces · 04.11.2026 · 18 (43) · 59867-59877

DOI: 10.1021/acsami.6c13437 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 21.10.2026. Verfasst von Daihyun Hwang und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Material Science and Engineering, Research Institute of Advanced Materials, Seoul National University, Seoul08826, Republic of Korea. Die Arbeit nennt 53 Literaturangaben. Gefördert von: Korea Basic Science Institute, National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The integration of functional electronic structures into curved geometries remains challenging, as conventional approaches rely on post-shaping or adhesive-assisted assembly that separate structure formation from shape definition. Here, we present a sequential-photocuring-assisted fabrication strategy that transforms planar multilayer structures into curved forms within a single material system. A wavelength-selective acrylate–epoxy resin is designed to create a deformable intermediate state under visible light, followed by a fixation-enabled final state through UV-triggered curing. A gradient-like curing strategy, involving time-dependent evolution of conversion during sequential irradiation, allows controlled partial epoxy conversion and provides both processability and subsequent reactivity. The second curing step induces simultaneous interfacial bonding and structural stiffening, enabling adhesive-free integration and fixation of the mold-imposed geometry. A multilayer patch antenna operating at 28 GHz is fabricated and transformed from planar to curved geometry while maintaining its performance. This approach provides a material-based framework for integrating planar-fabricated structures into three-dimensional form factors without thermoforming or adhesives.

Schlagwörter

Stichwörter der Autor:innen

acrylate–epoxy resinconformal antennacurved electronicsmultilayer integrationplanar-to-curved transformationsequential photocuringwavelength-selective curing

Autor:innen und Institutionen

  • Department of Material Science and Engineering, Research Institute of Advanced Materials, Seoul National University, Seoul08826, Republic of Korea.
  • Department of Electrical Engineering, Pohang University of Science and Technology (POSTECH), Pohang37673, Republic of Korea.
  • Electronic and Hybrid Materials Research Center, Korea Institute of Science and Technology (KIST), Seoul02792, Republic of Korea.
  • Department of Chemical and Biological Engineering, Institute of Advanced Materials and Systems, Sookmyung Women's University, Seoul04310, Republic of Korea.

ORCID-Profile: Yeonseo Lee, Hosun Lim, Jung Ah Lim, Heesuk Kim, Min Sang Kwon

Förderung

  • Korea Basic Science Institute
  • National Research Foundation of Korea

Zitieren

APA

Hwang, D., Lee, J., Lee, Y., Lee, Y., Han, S., Lim, H., Lim, J. A., Kim, H., Hong, W., & Kwon, M. S. (2026). Sequential-Photocuring-Assisted Transformation of Planar Multilayer Structures into Curved Geometries. ACS Applied Materials & Interfaces, 18(43), 59867-59877. https://doi.org/10.1021/acsami.6c13437

Vancouver

Hwang D, Lee J, Lee Y, Lee Y, Han S, Lim H, et al. Sequential-Photocuring-Assisted Transformation of Planar Multilayer Structures into Curved Geometries. ACS Applied Materials & Interfaces. 2026;18(43):59867-59877. doi:10.1021/acsami.6c13437

BibTeX
@article{Hwang2026,
  author = {Hwang, Daihyun and Lee, Jeonghyo and Lee, Yeonseo and Lee, Yougyoung and Han, Sungjun and Lim, Hosun and Lim, Jung Ah and Kim, Heesuk and Hong, Wonbin and Kwon, Min Sang},
  title = {Sequential-Photocuring-Assisted Transformation of Planar Multilayer Structures into Curved Geometries},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {43},
  pages = {59867--59877},
  doi = {10.1021/acsami.6c13437}
}
Kostenlos starten →