EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Insights into Specific Surface Area Assessed by Inverse Gas Chromatography and Manometric Gas Adsorption: A Comparative Review

Maksymilian Plata-Gryl iD, Adam Voelkel iD, Roberto Castro-Muñoz iD

ACS Applied Materials & Interfaces · 05.08.2026 · 18 (30) · 40178-40188

DOI: 10.1021/acsami.6c13432 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 24.07.2026. Verfasst von Maksymilian Plata-Gryl und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Sanitary Engineering, Faculty of Civil and Environmental Engineering, Gdansk University of Technology, ul. G. Narutowicza 11/12, Gdansk…. Die Arbeit nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Narodowe Centrum Nauki.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a critical comparison of the surface area (SSA) assessment using inverse gas chromatography (IGC) and manometric gas adsorption (MGA). Based on an analysis of 73 literature data pairs, it is demonstrated that IGC, with n-alkanes as a probe, may serve as a valuable complementary tool to the standard BET method. For macro-mesoporous materials with SSA values below 150 m2 g−1, IGC provides results that are qualitatively and quantitatively consistent with MGA. While close agreement was observed for macro-mesoporous samples, the current dataset suggests increased variability for solids with narrow mesopores or micropores. Further experimental studies are needed to fully establish the reliability of IGC for these complex pore structures, where steric hindrances and pore morphology often impede probe accessibility and govern the adsorption geometry, particularly as the current findings are constrained by a limited dataset. Furthermore, this study highlights a fundamental conceptual flaw in the fixed molecular area assumption, which is physically invalid. SSA values obtained from these techniques are apparent values rather than intrinsic material properties, as the effective molecular area of a probe molecule is highly sensitive to temperature, surface chemistry, and adsorption geometry. This work provides key insights into these limitations, emphasizing the necessity of accounting for the temperature dependence of the molecular area. Experimental procedures are not reviewed beyond the bare minimum required to understand methods and their limitations.

Schlagwörter

Stichwörter der Autor:innen

adsorptioninverse gas chromatographynitrogen adsorptionspecific surface areasurface properties

Autor:innen und Institutionen

  • Department of Sanitary Engineering, Faculty of Civil and Environmental Engineering, Gdansk University of Technology, ul. G. Narutowicza 11/12, Gdansk80-233, Poland.
  • Institute of Chemical Technology and Engineering, Poznan University of Technology, ul. Berdychowo 4, Poznan61-131, Poland.

ORCID-Profile: Maksymilian Plata-Gryl, Adam Voelkel, Roberto Castro-Muñoz

Förderung

  • Narodowe Centrum Nauki

Zitieren

APA

Plata-Gryl, M., Voelkel, A., & Castro-Muñoz, R. (2026). Insights into Specific Surface Area Assessed by Inverse Gas Chromatography and Manometric Gas Adsorption: A Comparative Review. ACS Applied Materials & Interfaces, 18(30), 40178-40188. https://doi.org/10.1021/acsami.6c13432

Vancouver

Plata-Gryl M, Voelkel A, Castro-Muñoz R. Insights into Specific Surface Area Assessed by Inverse Gas Chromatography and Manometric Gas Adsorption: A Comparative Review. ACS Applied Materials & Interfaces. 2026;18(30):40178-40188. doi:10.1021/acsami.6c13432

BibTeX
@article{PlataGryl2026,
  author = {Plata-Gryl, Maksymilian and Voelkel, Adam and Castro-Muñoz, Roberto},
  title = {Insights into Specific Surface Area Assessed by Inverse Gas Chromatography and Manometric Gas Adsorption: A Comparative Review},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {30},
  pages = {40178--40188},
  doi = {10.1021/acsami.6c13432}
}
Kostenlos starten →