EUVIMEDEUVIMED entdecken
Crossref

Scalable Hydrogen Peroxide Electrosynthesis and Electro-Fenton Pollutant Degradation Using Indium Single-Atom Catalysts

Vaibhav Upadhayay iD, Mahadeo A Mahadik, Joshua Wright, Shreya Singh iD, Vishnu Pusarapu iD, Shardul Dinesh Prabhu iD, Greeshma Gadikota iD

ACS Applied Materials & Interfaces · 14.10.2026 · 18 (40) · 54832-54845

DOI: 10.1021/acsami.6c13312 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 05.10.2026. Verfasst von Vaibhav Upadhayay und 6 weiteren Autor:innen. Beteiligte Einrichtung: Robert Frederick Smith School of Chemical and Biomolecular Engineering, Cornell University, Ithaca, New York14853, USA. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 53 Literaturangaben. Gefördert von: National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrochemical synthesis of hydrogen peroxide (H2O2) via the two-electron oxygen reduction reaction (2e– ORR) offers a safer, decentralized alternative to the centralized anthraquinone process. However, achieving high current efficiency at industrially relevant current densities (>100 mA cm–2) remains a major challenge for practical deployment. While rotating ring-disk electrode (RRDE) measurements provide valuable information on intrinsic ORR characteristics and H2O2 selectivity under well-defined hydrodynamic conditions, bulk electrosynthesis measurements provide complementary information on the realized electrochemical response and H2O2 production under coupled catalyst–electrode–electrolyte and mass-transport conditions. Herein, we report the development of a robust indium-based single-atom catalyst supported on oxidized carbon black (In-CB(O) SAC) that exhibits high electrocatalytic activity in both batch and flow electrolyzers. The catalyst shows a high onset potential (∼0.83 V vs RHE) and a low Tafel slope, hallmarks of efficient 2e– ORR kinetics, underscoring strong promise for scalable H2O2 production. The optimal In-CB(O) SAC achieves H2O2 production rates of 4.97 mol gcat–1 h–1 at 100 mA cm–2 (67% current efficiency) in batch and 13.8 mol gcat–1 h–1 at 200 mA cm–2 (>90% current efficiency) in flow mode, demonstrating competitive performance among reported 2e– ORR catalysts. Sustained high performance for 50 h at 125 mA cm–2 demonstrates the catalyst’s excellent durability, overcoming common stability challenges in H2O2 electrosynthesis. Furthermore, the in situ generated H2O2 enables ∼94% degradation of the recalcitrant organic pollutant methylene blue within 15 min via an electro-Fenton process, with a 51% reduction in TOC further confirming substantial mineralization, demonstrating its dual utility in both sustainable chemical synthesis and environmental remediation.

Schlagwörter

Stichwörter der Autor:innen

batch and flow electrolyzerselectro-Fenton oxidationhigh-current stabilityhydrogen peroxide electrosynthesisindium single-atom catalystsselective two-electron oxygen reduction reaction

Autor:innen und Institutionen

  • Robert Frederick Smith School of Chemical and Biomolecular Engineering, Cornell University, Ithaca, New York14853, USA.
  • Department of Earth and Environmental Engineering, The Fu Foundation School of Engineering and Applied Science, Columbia University, New York, New York10027, USA.
  • School of Civil and Environmental Engineering, Cornell University, Ithaca, New York14853, USA.
  • Advanced Photon Source, Argonne National Laboratory, Lemont, Illinois60439, USA.
  • Lenfest Center for Sustainable Energy, Columbia Climate School, Columbia University in the City of New York, New York, New York10027, USA.

ORCID-Profile: Vaibhav Upadhayay, Shreya Singh, Vishnu Pusarapu, Shardul Dinesh Prabhu, Greeshma Gadikota

Förderung

  • National Science Foundation

Zitieren

APA

Upadhayay, V., Mahadik, M. A., Wright, J., Singh, S., Pusarapu, V., Prabhu, S. D., & Gadikota, G. (2026). Scalable Hydrogen Peroxide Electrosynthesis and Electro-Fenton Pollutant Degradation Using Indium Single-Atom Catalysts. ACS Applied Materials & Interfaces, 18(40), 54832-54845. https://doi.org/10.1021/acsami.6c13312

Vancouver

Upadhayay V, Mahadik MA, Wright J, Singh S, Pusarapu V, Prabhu SD, et al. Scalable Hydrogen Peroxide Electrosynthesis and Electro-Fenton Pollutant Degradation Using Indium Single-Atom Catalysts. ACS Applied Materials & Interfaces. 2026;18(40):54832-54845. doi:10.1021/acsami.6c13312

BibTeX
@article{Upadhayay2026,
  author = {Upadhayay, Vaibhav and Mahadik, Mahadeo A and Wright, Joshua and Singh, Shreya and Pusarapu, Vishnu and Prabhu, Shardul Dinesh and Gadikota, Greeshma},
  title = {Scalable Hydrogen Peroxide Electrosynthesis and Electro-Fenton Pollutant Degradation Using Indium Single-Atom Catalysts},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {40},
  pages = {54832--54845},
  doi = {10.1021/acsami.6c13312}
}
Kostenlos starten →