Sustainable Visible-Light Photoinitiation Enabled by a Bio-Based Photosensitizer/Oxime Ester Combination via Triplet–Triplet Energy Transfer
ACS Applied Materials & Interfaces · 05.08.2026 · 18 (30) · 41869-41880
DOI: 10.1021/acsami.6c13183 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 23.07.2026. Verfasst von Kaidan Yang und 9 weiteren Autor:innen. Beteiligte Einrichtung: Université de Haute-Alsace, CNRS, IS2M UMR7361, F-68100Mulhouse, France. Die Arbeit nennt 44 Literaturangaben. Gefördert von: Science and Technology Commission of Shanghai Municipality, China Scholarship Council.
Abstract (Originalsprache)
AC:AC:Visible-light photopolymerization offers safer processing, lower energy input, and broader compatibility with advanced manufacturing than thermally initiated curing or short-wavelength UV processes. However, sustainable photoinitiating systems that operate efficiently under visible light remain limited. Here, a sustainable two-component strategy is reported by combining bio-derived oxime esters with natural or bio-inspired photosensitizers for 405 nm curing. Among the systems investigated, the synthesized oxime ester (OXE1) and menadione (MD, vitamin K3) pair show the best performance, enabling rapid photopolymerization of TMPTA with good formulation homogeneity, low coloration, and good storage stability. Electrochemical analysis and excited-state energetics indicate that direct single-electron transfer between MD and OXE1 is thermodynamically unfavorable. In contrast, steady-state photolysis, laser flash photolysis, CO2 evolution, and ESR spin trapping support a triplet–triplet energy transfer pathway, followed by N–O bond cleavage and decarboxylation, to generate initiating radicals. This work establishes a simple sensitization principle for converting UV-responsive bio-derived oxime esters into visible-light photoinitiators and provides a sustainable design strategy for photopolymerization and 3D microfabrication.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Université de Haute-Alsace, CNRS, IS2M UMR7361, F-68100Mulhouse, France.
- Université de Strasbourg , 4 Rue Blaise Pascal, F-67081Strasbourg, France.
- Aix Marseille Université, CNRS, ICR UMR7273 , 13397Marseille Cedex 20, France.
- Future Industries Institute, Adelaide University , Mawson Lakes, South Australia5095, Australia.
- School of Chemical Engineering, Adelaide University , Adelaide, SA5005, Australia.
- State Key Laboratory of High Performance Ceramics, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai200050, P. R. China.
ORCID-Profile: Coralie Ohl, Jacques Lalevée
Förderung
- Science and Technology Commission of Shanghai Municipality
- China Scholarship Council
Zitieren
APA
Yang, K., Manivel, M., Ohl, C., Dietlin, C., Morlet-Savary, F., Schmitt, M., Joly, J. P., Zhang, J., Xiao, P., & Lalevée, J. (2026). Sustainable Visible-Light Photoinitiation Enabled by a Bio-Based Photosensitizer/Oxime Ester Combination via Triplet–Triplet Energy Transfer. ACS Applied Materials & Interfaces, 18(30), 41869-41880. https://doi.org/10.1021/acsami.6c13183
Vancouver
Yang K, Manivel M, Ohl C, Dietlin C, Morlet-Savary F, Schmitt M, et al. Sustainable Visible-Light Photoinitiation Enabled by a Bio-Based Photosensitizer/Oxime Ester Combination via Triplet–Triplet Energy Transfer. ACS Applied Materials & Interfaces. 2026;18(30):41869-41880. doi:10.1021/acsami.6c13183
BibTeX
@article{Yang2026,
author = {Yang, Kaidan and Manivel, Margot and Ohl, Coralie and Dietlin, Céline and Morlet-Savary, Fabrice and Schmitt, Michael and Joly, Jean-Patrick and Zhang, Jing and Xiao, Pu and Lalevée, Jacques},
title = {Sustainable Visible-Light Photoinitiation Enabled by a Bio-Based Photosensitizer/Oxime Ester Combination via Triplet–Triplet Energy Transfer},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {30},
pages = {41869--41880},
doi = {10.1021/acsami.6c13183}
}
EUVIMED