EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Rheologically Synchronized Protein and Fat-Emulsion Inks for High-Throughput Multimaterial Printing of Edible Soft Composites

Hyunjin Lee, Yu-Seung Choi, Hyun-Su Choi, Rahyeon Tae, Jiheon Kang iD, Donghyeok Kang, Wooseok Jung, Kanghee Han, Minseo Cho, Soo Chung, Yong-Ro Kim, Sangbae Park iD und 1 weitere

ACS Applied Materials & Interfaces · 02.09.2026 · 18 (34) · 46830-46846

DOI: 10.1021/acsami.6c12733 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 22.08.2026. Verfasst von Hyunjin Lee und 12 weiteren Autor:innen. Beteiligte Einrichtung: Department of Agriculture, Forestry, and Bioresources, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul08826, Republic of Korea. Hauptthemen laut MEDLINE: Ink, Soybean Proteins, Printing, Three-Dimensional. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Seoul National University, National Research Foundation of Korea, Korea Institute of Planning and Evaluation for Technology in Food, Agriculture and Forestry.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Multimaterial additive manufacturing of edible, food-grade soft materials offers a route to spatially organize protein- and lipid-rich domains in structured meat analogues, but it requires rheological compatibility between compositionally distinct inks to maintain stable extrusion, programmable switching, and spatial fidelity. Protein ink and fat-emulsion ink represent a particularly demanding materials pair because they combine a hydrated protein-rich network with an oil-in-water emulsion, resulting in different yielding, recovery, and thermal responses during printing and postprocessing. Here, we introduce rheological synchronization of protein and fat-emulsion inks as a materials design strategy for high-throughput multimaterial three-dimensional (3D) printing of heterogeneous edible soft composites. A xanthan-gum-tuned soy protein ink and a protein-stabilized fat-emulsion ink were formulated to exhibit shear-thinning behavior, synchronized yielding, and rapid post-shear recovery. Microbial transglutaminase-containing formulations further improved structural stability during mild thermal post-curing. When integrated with a parallel Y-junction printing platform, the synchronized inks supported geometrically consistent filament formation across eight nozzles and programmable millimeter-scale switching with limited interfacial blurring. Parallelization increased nominal mass throughput from 0.22 g min−1 in the single-channel configuration to 1.77 g min−1 in the eight-channel configuration, and a 91.2 cm3 whole-cut-inspired heterogeneous construct was fabricated with an active extrusion time of 20 min. The printed edible composites achieved 87.0% fidelity to the digital design and 80.3% protein-domain fidelity to a pork-belly-derived morphological reference, while digitally programmed protein-to-fat-emulsion ratios enabled composition-dependent textural tuning. These results establish rheological synchronization of protein and fat-emulsion inks as a design principle for scalable multimaterial additive manufacturing of structured edible soft materials.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

InkSoybean ProteinsPrinting, Three-DimensionalEmulsionsRheologyMeat SubstitutesTransglutaminasesAnimalsPolysaccharides, Bacterial

Stichwörter der Autor:innen

Y-junction printingedible soft compositesfat-emulsion inkmultimaterial additive manufacturingprotein inkrheological synchronizationstructured meat analogues

Substanzen

EmulsionsSoybean ProteinsTransglutaminasesxanthan gumPolysaccharides, Bacterial

Autor:innen und Institutionen

  • Department of Agriculture, Forestry, and Bioresources, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul08826, Republic of Korea.
  • Department of Biosystems Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul08826, Republic of Korea.
  • Integrated Major in Global Smart Farm, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul08826, Republic of Korea.
  • Department of Biomaterials Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul08826, Republic of Korea.
  • Research Institute of Agriculture and Life Sciences, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul08826, Republic of Korea.

ORCID-Profile: Jiheon Kang, Sangbae Park, Sungchul Shin

Förderung

  • Seoul National University
  • National Research Foundation of Korea
  • Korea Institute of Planning and Evaluation for Technology in Food, Agriculture and Forestry

Zitieren

APA

Lee, H., Choi, Y. S., Choi, H. S., Tae, R., Kang, J., Kang, D., Jung, W., Han, K., Cho, M., Chung, S., Kim, Y. R., Park, S., & Shin, S. (2026). Rheologically Synchronized Protein and Fat-Emulsion Inks for High-Throughput Multimaterial Printing of Edible Soft Composites. ACS Applied Materials & Interfaces, 18(34), 46830-46846. https://doi.org/10.1021/acsami.6c12733

Vancouver

Lee H, Choi YS, Choi HS, Tae R, Kang J, Kang D, et al. Rheologically Synchronized Protein and Fat-Emulsion Inks for High-Throughput Multimaterial Printing of Edible Soft Composites. ACS Applied Materials & Interfaces. 2026;18(34):46830-46846. doi:10.1021/acsami.6c12733

BibTeX
@article{Lee2026,
  author = {Lee, Hyunjin and Choi, Yu-Seung and Choi, Hyun-Su and Tae, Rahyeon and Kang, Jiheon and Kang, Donghyeok and Jung, Wooseok and Han, Kanghee and Cho, Minseo and Chung, Soo and Kim, Yong-Ro and Park, Sangbae and Shin, Sungchul},
  title = {Rheologically Synchronized Protein and Fat-Emulsion Inks for High-Throughput Multimaterial Printing of Edible Soft Composites},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {34},
  pages = {46830--46846},
  doi = {10.1021/acsami.6c12733}
}
Kostenlos starten →