Enhanced Hydration Lubrication of Ultrahigh Molecular Weight Polyethylene/Halloysite Nanotubes Composites with Embedded Polymer Brushes
ACS Applied Materials & Interfaces · 12.08.2026 · 18 (31) · 43173-43183
DOI: 10.1021/acsami.6c11453 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 22.07.2026. Verfasst von Hongjiang He und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Tribology in Advanced Equipment, Tsinghua University, Beijing100084, China. Die Arbeit nennt 52 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Beijing Association for Science and Technology, National Energy and Environmental Innovation Institute, China Energy Investment Corporation.
Abstract (Originalsprache)
Osteoarthritis, a degenerative joint disease affecting hundreds of millions of people worldwide, leads to chronic pain and reduced mobility, for which total joint arthroplasty remains the definitive and most effective treatment. Ultrahigh molecular weight polyethylene (UHMWPE) has been the most widely used bearing material in artificial joints owing to its excellent tribological properties and biocompatibility. However, the long-term clinical outcome of this treatment is limited by the wear-induced failure of UHMWPE implants. Inspired by the natural joint’s lubrication mechanism, a bulk grafting modification strategy was adopted to fabricate a bio-lubricating UHMWPE composite with an extended service life. Hydrophilic anionic polymer brushes poly(3-sulfopropyl methacrylate potassium salt) (PSPMK) were grafted onto UHMWPE powder via photo-induced polymerization, while halloysite nanotubes (HNTs) were similarly modified to enhance dispersion and interfacial synergy. The composite with 1 wt % modified HNTs exhibited a remarkably low coefficient of friction (0.012) and wear rate (8.98 × 10–7 mm3·N–1·m–1), representing reductions of 52.9% and 66.2%, respectively, compared to pristine UHMWPE. Mechanical properties, including compressive strength, modulus, and hardness, were also improved due to the reinforcing effect of well-dispersed HNTs. The integrated PSPMK brushes embedded throughout the bulk material ensure persistent hydration lubrication even after surface wear. This work provides a promising material design for next-generation long-lasting artificial joints with combined high strength and superior lubrication.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Tribology in Advanced Equipment, Tsinghua University, Beijing100084, China.
- Engineering Center for Superlubricity, Jihua Laboratory, Foshan528200, China.
ORCID-Profile: Tianyi Han, Wei Wu, Chenhui Zhang
Förderung
- National Natural Science Foundation of China
- Beijing Association for Science and Technology
- National Energy and Environmental Innovation Institute, China Energy Investment Corporation
Zitieren
APA
He, H., Han, T., Wu, W., Lan, J., & Zhang, C. (2026). Enhanced Hydration Lubrication of Ultrahigh Molecular Weight Polyethylene/Halloysite Nanotubes Composites with Embedded Polymer Brushes. ACS Applied Materials & Interfaces, 18(31), 43173-43183. https://doi.org/10.1021/acsami.6c11453
Vancouver
He H, Han T, Wu W, Lan J, Zhang C. Enhanced Hydration Lubrication of Ultrahigh Molecular Weight Polyethylene/Halloysite Nanotubes Composites with Embedded Polymer Brushes. ACS Applied Materials & Interfaces. 2026;18(31):43173-43183. doi:10.1021/acsami.6c11453
BibTeX
@article{He2026,
author = {He, Hongjiang and Han, Tianyi and Wu, Wei and Lan, Jianyong and Zhang, Chenhui},
title = {Enhanced Hydration Lubrication of Ultrahigh Molecular Weight Polyethylene/Halloysite Nanotubes Composites with Embedded Polymer Brushes},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {31},
pages = {43173--43183},
doi = {10.1021/acsami.6c11453}
}
EUVIMED