Eco-friendly Multiscale Nanostructure Aerogels for Energy Conservation via Radiative Cooling
ACS Applied Materials & Interfaces · 12.08.2026 · 18 (31) · 43162-43172
DOI: 10.1021/acsami.6c11357 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 29.07.2026. Verfasst von Xiaomin Zeng und 8 weiteren Autor:innen. Beteiligte Einrichtung: Guangxi Key Laboratory of Optical and Electronic Materials and Devices, College of Materials Science and Engineering, Guilin University of Technology…. Die Arbeit nennt 42 Literaturangaben. Gefördert von: Natural Science Foundation of Guangxi Zhuang Autonomous Region, National Natural Science Foundation of China, Science and Technology Major Project of Guangxi.
Abstract (Originalsprache)
Polymer-based radiative cooling materials are widely utilized in green building and carbon neutrality initiatives owing to their inherent optical properties, flexibility, and scalability. However, the optical performance of eco-friendly polymer-based materials requires further improvement to achieve high-efficiency radiative cooling. Herein, a multiscale nanostructure calcium carbonate (CaCO3)/polyvinyl alcohol aerogel (MNCPA) was designed and fabricated through an optical simulation-guided approach. The MNCPA exhibits a multiscale nanostructure comprising nanostrips (∼50 nm), CaCO3 nanoparticles (NPs, ∼400 nm), and nano-protrusions (∼900 nm). This multiscale configuration enables distributed reflection across the ultraviolet−visible (0.3−0.8 μm), short-wave near-infrared (0.8−1.1 μm), and long-wave near-infrared (1.1−2.5 μm) spectral bands, thereby significantly enhancing full-spectrum solar reflectivity. Furthermore, the infrared vibration characteristics of CaCO3 NPs, combined with the enlarged thermal radiation area provided by this multiscale architecture, enhance emissivity within the atmospheric transparency window (8−13 μm). Under outdoor solar exposure, a temperature reduction of ∼15.8 °C was achieved by the MNCPA, surpassing that of a commercial film by ∼5.1 °C. Additionally, building energy simulations using an MNCPA-integrated model demonstrated an average annual cooling energy conservation of ∼32.66 MJ m−2 relative to baseline consumption, corresponding to an energy saving ratio of ∼16.85%. This strategy provides a viable approach for advancing eco-friendly materials toward building energy conservation.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Guangxi Key Laboratory of Optical and Electronic Materials and Devices, College of Materials Science and Engineering, Guilin University of Technology, Guilin541004, P. R. China.
- Medical College of Guangxi University, Guangxi University, Nanning530004, P. R. China.
ORCID-Profile: Shizhe Lin
Förderung
- Natural Science Foundation of Guangxi Zhuang Autonomous Region
- National Natural Science Foundation of China
- Science and Technology Major Project of Guangxi
- Guangxi Green Seedling Programme
Zitieren
APA
Zeng, X., Liang, J., Sun, Y., Yang, C., Li, M., Pan, J., Jiang, Q., Lin, S., & Long, F. (2026). Eco-friendly Multiscale Nanostructure Aerogels for Energy Conservation via Radiative Cooling. ACS Applied Materials & Interfaces, 18(31), 43162-43172. https://doi.org/10.1021/acsami.6c11357
Vancouver
Zeng X, Liang J, Sun Y, Yang C, Li M, Pan J, et al. Eco-friendly Multiscale Nanostructure Aerogels for Energy Conservation via Radiative Cooling. ACS Applied Materials & Interfaces. 2026;18(31):43162-43172. doi:10.1021/acsami.6c11357
BibTeX
@article{Zeng2026,
author = {Zeng, Xiaomin and Liang, Jinling and Sun, Yangyang and Yang, Changnai and Li, Mengge and Pan, Jiaquan and Jiang, Qiong and Lin, Shizhe and Long, Fei},
title = {Eco-friendly Multiscale Nanostructure Aerogels for Energy Conservation via Radiative Cooling},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {31},
pages = {43162--43172},
doi = {10.1021/acsami.6c11357}
}
EUVIMED