EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Flexible 3D-Printed Piezoelectric and Bioinstructive Platforms for Skeletal Muscle Development and Organization

Derya Ozhava iD, Surendrasingh Y Sonaye, Breanne L Welsh, Phuong T Nguyen, Yavar Shiravand, Kara E Timinski, Karim Elhattab iD, Keith Coasey iD, Kailash Gulshan, Prabaha Sikder iD

ACS Applied Materials & Interfaces · 2026

DOI: 10.1021/acsami.6c11224 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, 2026. Verfasst von Derya Ozhava und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Cleveland State University, Cleveland, Ohio44115, United States. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Muscle, Skeletal, Muscle Development, Tissue Scaffolds. Die Arbeit nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIAMS NIH HHS, National Institute of Arthritis and Musculoskeletal and Skin Diseases.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Volumetric muscle loss (VML) is a devastating injury in which extensive skeletal muscle loss overwhelms endogenous healing. Despite their therapeutic efficacy, acellular constructs fail to provide a comprehensive set of bioactive cues required for muscle development. Notably, very few constructs provide bioelectrical cues necessary for muscle development. To address that need, this study aimed to develop a myogenic platform that provides a comprehensive set of bioactive cues, including bioelectrical cues that can be delivered wirelessly, to promote skeletal muscle development. To achieve this, we engineered a microchanneled, piezoelectric, 3D-printed platform based on a unique interpenetrating hydrogel network of gelatin methacrylate and poly(acrylic acid) that incorporates barium titanate nanoparticles. Rheological studies showed stable gel-like viscoelasticity and shear-thinning behavior of the hydrogels, indicating their suitability for extrusion-3D printing. Physicochemical characterization demonstrated the platform’s structural fidelity, precise microchannel definition, pronounced flexibility, and self-adhesiveness. While the platform’s stiffness was comparable to that of skeletal muscle, it also generated a surface potential of ∼90 mV when deformed by ultrasound (US), highlighting its piezoelectric nature and ability to harness electromechanically triggered bioelectrical cues. FE-SEM and immunofluorescence analyses revealed that microchannels and US-induced piezoelectricity from the platform can synergistically help form dense, compact, and aligned myotubes. Notably, we demonstrate that the US-induced piezoelectric platforms can promote early-stage myotube development, enhance myogenic progression, and help form mature, elongated, thick myotubes over time. Finally, we observe that the piezoelectric platforms exhibit increased FAK and MAPK activation in adherent cells over time, suggesting that these pathways can contribute to transducing electromechanical cues that promote myotube maturation. Overall, this is the first-of-its-kind comprehensive study to engineer a platform that delivers a comprehensive set of bioactive cues, specifically wirelessly delivered bioelectrical cues, resulting in a spatiotemporally bioinstructive microenvironment for skeletal muscle development. We believe this unique platform could be a promising regenerative therapy for VML.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalMuscle, SkeletalMuscle DevelopmentTissue ScaffoldsAnimalsBarium CompoundsTissue EngineeringHydrogelsTitaniumMiceCell LineGelatin

Stichwörter der Autor:innen

3D PrintingMyogenic platformbioelectricalpiezoelectricskeletal muscle tissue engineering

Substanzen

Barium CompoundsHydrogelsTitaniumbarium titanate(IV)Gelatin

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Cleveland State University, Cleveland, Ohio44115, United States.
  • Chemical and Biomedical Engineering, Cleveland State University, Cleveland, Ohio44115, United States.
  • Department of Biology, Geology and Environmental Sciences, Cleveland State University, Cleveland, Ohio44115, United States.
  • TA Instruments - Waters LLC , New Castle, Delaware19720, United States.
  • Department of Heart, Blood, and Kidney Research, Cleveland Clinic, Cleveland, Ohio44195, United States.

ORCID-Profile: Derya Ozhava, Karim Elhattab, Keith Coasey, Prabaha Sikder

Förderung

  • NIAMS NIH HHS
  • National Institute of Arthritis and Musculoskeletal and Skin Diseases

Zitieren

APA

Ozhava, D., Sonaye, S. Y., Welsh, B. L., Nguyen, P. T., Shiravand, Y., Timinski, K. E., Elhattab, K., Coasey, K., Gulshan, K., & Sikder, P. (2026). Flexible 3D-Printed Piezoelectric and Bioinstructive Platforms for Skeletal Muscle Development and Organization. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c11224

Vancouver

Ozhava D, Sonaye SY, Welsh BL, Nguyen PT, Shiravand Y, Timinski KE, et al. Flexible 3D-Printed Piezoelectric and Bioinstructive Platforms for Skeletal Muscle Development and Organization. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c11224

BibTeX
@article{Ozhava2026,
  author = {Ozhava, Derya and Sonaye, Surendrasingh Y and Welsh, Breanne L and Nguyen, Phuong T and Shiravand, Yavar and Timinski, Kara E and Elhattab, Karim and Coasey, Keith and Gulshan, Kailash and Sikder, Prabaha},
  title = {Flexible 3D-Printed Piezoelectric and Bioinstructive Platforms for Skeletal Muscle Development and Organization},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  doi = {10.1021/acsami.6c11224}
}
Kostenlos starten →