Through-Thickness Vertically Aligned Graphene-Fiber Thermal Interface Materials with Thermal Conductivity Approaching the Parallel-Model Estimate and Low Thermal Contact Resistance
ACS Applied Materials & Interfaces · 12.08.2026 · 18 (31) · 43149-43161
DOI: 10.1021/acsami.6c10738 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 27.07.2026. Verfasst von Xin Zhang und 9 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing100029, China. Die Arbeit nennt 54 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Beijing Municipality, State Key Laboratory of Organic-Inorganic Composites.
Abstract (Originalsprache)
Conventional elastomer-based thermal interface materials (E-TIMs) are constrained by the trade-off between high thermal conductivity and low thermal contact resistance, limiting their use in high-power chip cooling. We developed a vitrimer-enabled, through-thickness vertically aligned graphene-fiber E-TIM that addresses this limitation by combining vertically continuous heat-conduction pathways with an adaptive polymer interface. Continuous graphene fibers were mechanically aligned, infiltrated with a β-hydroxy ester vitrimer-based polydimethylsiloxane matrix, and assembled through stacking-welding to form dense, continuous heat-transport pathways along the thickness direction. At a graphene-fiber volume fraction of only 16.71 vol %, the E-TIM achieves an ultrahigh through-plane thermal conductivity of 160.2 W m–1 K–1, approaching the parallel-model estimate, indicating efficient translation of the axial thermal conductivity of GFs into macroscopic through-plane heat transport. Thermally activated transesterification in the vitrimer matrix enables stress relaxation, layer welding, and interfacial morphological reconstruction, reducing the thermal contact resistance to 14.4 mm2 K W–1 under 40 psi. Molecular dynamics simulations further suggest that vitrimer-induced interfacial reconstruction increases the effective contact area and interfacial thermal conductance beyond conventional viscoelastic creep. In a device-level cooling demonstration, the E-TIM outperforms a commercial E-TIM by lowering the steady-state heat-source temperature by 20.8 °C, highlighting its strong potential for high-power chip thermal management.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing100029, China.
- Engineering Research Center of Elastomer Materials Energy Conservation and Resources, Ministry of Education, Beijing100029, China.
- State Key Laboratory of Fluorine and Nitrogen Chemicals, School of Chemical Engineering and Technology, Xi'an Jiaotong University, Xi'an710049, China.
- Beijing Key Laboratory of Wood Science and Engineering & MOE Key Laboratory of Wooden Material Science and Application, Beijing Forestry University, Beijing100083, China.
ORCID-Profile: Haoxiang Li, Yonglai Lu
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Beijing Municipality
- State Key Laboratory of Organic-Inorganic Composites
- Special Project for Research and Development in Key areas of Guangdong Province
- State Key Laboratory of Organic?Inorganic Composites
- Young Elite Scientists Sponsorship Program of the Beijing High Innovation Plan
Zitieren
APA
Zhang, X., Yang, J., Lu, Z., Zhou, L., Wang, J., Ma, Z., Chu, J., Li, H., Li, J., & Lu, Y. (2026). Through-Thickness Vertically Aligned Graphene-Fiber Thermal Interface Materials with Thermal Conductivity Approaching the Parallel-Model Estimate and Low Thermal Contact Resistance. ACS Applied Materials & Interfaces, 18(31), 43149-43161. https://doi.org/10.1021/acsami.6c10738
Vancouver
Zhang X, Yang J, Lu Z, Zhou L, Wang J, Ma Z, et al. Through-Thickness Vertically Aligned Graphene-Fiber Thermal Interface Materials with Thermal Conductivity Approaching the Parallel-Model Estimate and Low Thermal Contact Resistance. ACS Applied Materials & Interfaces. 2026;18(31):43149-43161. doi:10.1021/acsami.6c10738
BibTeX
@article{Zhang2026,
author = {Zhang, Xin and Yang, Junzhe and Lu, Zhaoyu and Zhou, Letian and Wang, Junyan and Ma, Zhiyuan and Chu, Junfeng and Li, Haoxiang and Li, Jingchao and Lu, Yonglai},
title = {Through-Thickness Vertically Aligned Graphene-Fiber Thermal Interface Materials with Thermal Conductivity Approaching the Parallel-Model Estimate and Low Thermal Contact Resistance},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {31},
pages = {43149--43161},
doi = {10.1021/acsami.6c10738}
}
EUVIMED