EUVIMEDEUVIMED entdecken
Crossref

Effect of Individual Layer Thickness on the Self-Organized Wrinkle Formation in a Metal Polymer Bilayer Thin Film

Sudipta Roy, Sumantra Mandal iD, Rabibrata Mukherjee iD, Rahul Mitra iD

ACS Applied Materials & Interfaces · 28.10.2026 · 18 (42) · 58469-58479

DOI: 10.1021/acsami.6c09278 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 14.10.2026. Verfasst von Sudipta Roy und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, Kharagpur, West Bengal721302, India. Die Arbeit nennt 45 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

It is well-known that when a thin layer of metal is thermally deposited on top of a polymer thin film (particularly a cross-linked elastomer thin film), self-organized wrinkles form due to the thermal stresses generated at the metal polymer interface due to mismatch between the coefficients of thermal expansion of the two individual layers. It has been extensively reported that the wavelength of the wrinkles (λS) varies linearly with the metal film thickness (hM), which is consistent with the linear elastic buckling theory. However, in this paper, we show that in addition to hM, the polymer (bottom) layer thickness (hFP) and the elasticity of the polymer film (vis-à-vis the amount of cross-linker percentage, CL) in the Sylgard 184 film also influence both the wavelength (λS) and amplitude (aS) of the wrinkles, when a thin aluminum (Al) layer is thermally deposited over a spin-coated, fully cross-linked polydimethylsiloxane (PDMS) Sylgard 184 thin film. We show that both λS and aS show nonlinear and nonmonotonic dependence on hFP as well as CL. The work sheds new insight into how the thermal stress-mediated deformation and growth of the instability patterns at the metal–polymer interface are influenced by the presence of a rigid substrate underneath the bottom polymer layer. Based on careful atomic force microscopy, we also capture stress relaxation-mediated partial flattening of the wrinkles in the films with high CL due to stress relaxation. The work unleashes the potential of creating patterns on demand by modulating different parameters of the metal polymer thin bilayer system with possible modulation of wettability and optical properties.

Schlagwörter

Stichwörter der Autor:innen

instabilityinterfacial stressmetal polymer bilayerself-organized wrinklethin film

Autor:innen und Institutionen

  • Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, Kharagpur, West Bengal721302, India.
  • Instability & Soft Patterning Laboratory, Department of Chemical Engineering, Indian Institute of Technology Kharagpur, Kharagpur, West Bengal721302, India.

ORCID-Profile: Sumantra Mandal, Rabibrata Mukherjee, Rahul Mitra

Zitieren

APA

Roy, S., Mandal, S., Mukherjee, R., & Mitra, R. (2026). Effect of Individual Layer Thickness on the Self-Organized Wrinkle Formation in a Metal Polymer Bilayer Thin Film. ACS Applied Materials & Interfaces, 18(42), 58469-58479. https://doi.org/10.1021/acsami.6c09278

Vancouver

Roy S, Mandal S, Mukherjee R, Mitra R. Effect of Individual Layer Thickness on the Self-Organized Wrinkle Formation in a Metal Polymer Bilayer Thin Film. ACS Applied Materials & Interfaces. 2026;18(42):58469-58479. doi:10.1021/acsami.6c09278

BibTeX
@article{Roy2026,
  author = {Roy, Sudipta and Mandal, Sumantra and Mukherjee, Rabibrata and Mitra, Rahul},
  title = {Effect of Individual Layer Thickness on the Self-Organized Wrinkle Formation in a Metal Polymer Bilayer Thin Film},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {42},
  pages = {58469--58479},
  doi = {10.1021/acsami.6c09278}
}
Kostenlos starten →