Fabrication of Liquid Metal Composite Ionic Liquid Hydrogels for Antifouling Application
ACS Applied Materials & Interfaces · 19.08.2026 · 18 (32) · 44623-44632
DOI: 10.1021/acsami.6c09270 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 10.08.2026. Verfasst von Haohang Yuan und 7 weiteren Autor:innen. Beteiligte Einrichtung: Center of Advanced Lubrication and Seal Materials, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi'an710072, P…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, National Local Joint Laboratory for Advanced Textile Processing and Clean Production, Wuhan Textile University.
Abstract (Originalsprache)
Marine biofouling remains a major challenge for maritime industries, driving the need for low‑toxicity and durable antifouling coatings. Herein, we present a composite hydrogel coating (IL-GLM@Gel) constructed by integrating gallium-based liquid metal (GLM) nanodroplets and a halogenated ionic liquid ([Bmim]·ZnCl2) within a poly(acrylamide-co-acrylic acid) hydrogel matrix. The GLM nanodroplets were first uniformly dispersed and immobilized within the hydrogel via in situ polymerization, followed by solvent exchange to introduce the ionic liquid. The resulting IL-GLM@Gel coating exhibits a densely crosslinked network structure, as indicated by SEM, and demonstrates outstanding synergistic antifouling properties. It achieves antibacterial rates of 96.6% against E. coli and 99.2% against S. aureus, along with algal removal rates of 90.6% for Dunaliella and 98.1% for Porphyridium. The enhanced performance is attributed to the combined effects of Ga3+-induced oxidative stress and the membrane disruption caused by the imidazolium cations. Furthermore, the coating displays environmental stability, including a low water swelling ratio (3.7%), tunable mechanical properties (tensile stress up to 0.36 MPa for Fe3+-based IL and strain up to 957% for Zn2+-based IL), superior water retention, and a low friction coefficient of 0.045. Overall, this work presents a promising strategy for the design of high-performance, multifunctional hydrogel coatings for potential long-term marine antifouling applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Center of Advanced Lubrication and Seal Materials, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi'an710072, P. R. China.
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou730000, China.
ORCID-Profile: Shujuan Liu, Qian Ye, Feng Zhou
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
- National Local Joint Laboratory for Advanced Textile Processing and Clean Production, Wuhan Textile University
Zitieren
APA
Yuan, H., Ji, Y., Yang, G., Liu, B., Wang, Y., Liu, S., Ye, Q., & Zhou, F. (2026). Fabrication of Liquid Metal Composite Ionic Liquid Hydrogels for Antifouling Application. ACS Applied Materials & Interfaces, 18(32), 44623-44632. https://doi.org/10.1021/acsami.6c09270
Vancouver
Yuan H, Ji Y, Yang G, Liu B, Wang Y, Liu S, et al. Fabrication of Liquid Metal Composite Ionic Liquid Hydrogels for Antifouling Application. ACS Applied Materials & Interfaces. 2026;18(32):44623-44632. doi:10.1021/acsami.6c09270
BibTeX
@article{Yuan2026,
author = {Yuan, Haohang and Ji, Yikun and Yang, Guoliang and Liu, Bin and Wang, Yixin and Liu, Shujuan and Ye, Qian and Zhou, Feng},
title = {Fabrication of Liquid Metal Composite Ionic Liquid Hydrogels for Antifouling Application},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {32},
pages = {44623--44632},
doi = {10.1021/acsami.6c09270}
}
EUVIMED