High-Sensitivity Flexible Strain Sensor Based on MWCNTs/HNTs Nanocomposites for Physiological and Handwriting Monitoring
ACS Applied Materials & Interfaces · 2026
DOI: 10.1021/acsami.6c08945 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, 2026. Verfasst von Wenshan Li und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Chemical Safety, College of Control Science and Engineering, China University of Petroleum (East China), Qingdao266580, China. Hauptthemen laut MEDLINE: Nanocomposites, Nanotubes, Carbon, Handwriting, Wearable Electronic Devices. Die Arbeit nennt 37 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Shandong Province, Taishan Scholar Project of Shandong Province.
Abstract (Originalsprache)
With the rapid development of flexible electronics and human–computer interaction technologies, the demand for high-performance flexible strain sensors for human motion and physiological signal monitoring has grown sharply. This study developed a sandwich-structured flexible strain sensor based on multi-walled carbon nanotube/halloysite nanotube (MWCNT/HNT) nanocomposites. A polydopamine (PDA) modification layer was first formed on the polydimethylsiloxane (PDMS) film via in situ polymerization of dopamine (DA), which significantly improved the surface hydrophilicity and enhanced interfacial adhesion between PDMS and the subsequent conductive layer. The MWCNT/HNT mixed conductive layer was then uniformly sprayed onto the PDA@PDMS film, followed by PDMS encapsulation to form the final structure. The sensor integrates the excellent conductivity of MWCNTs and the mechanical reinforcement capability of HNTs, achieving a wide strain-sensing range, high sensitivity with GF values of 14.46 at 0–40% strain and 35.55 at 40–85% strain, fast response/recovery times of 250/300 ms, and excellent cyclic stability over 7500 cycles. It can sensitively detect physiological signals such as swallowing, pulse and breathing, as well as motion signals including joint bending and mouse clicking. Moreover, it can distinguish subtle finger movements during English letter writing, showing broad application potential in wearable healthcare devices and human–computer interaction systems.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- State Key Laboratory of Chemical Safety, College of Control Science and Engineering, China University of Petroleum (East China), Qingdao266580, China.
ORCID-Profile: Dongzhi Zhang
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Shandong Province
- Taishan Scholar Project of Shandong Province
Zitieren
APA
Li, W., Sun, J., Shao, J., Shi, W., Shao, X., & Zhang, D. (2026). High-Sensitivity Flexible Strain Sensor Based on MWCNTs/HNTs Nanocomposites for Physiological and Handwriting Monitoring. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c08945
Vancouver
Li W, Sun J, Shao J, Shi W, Shao X, Zhang D. High-Sensitivity Flexible Strain Sensor Based on MWCNTs/HNTs Nanocomposites for Physiological and Handwriting Monitoring. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c08945
BibTeX
@article{Li2026,
author = {Li, Wenshan and Sun, Jingwen and Shao, Jiahui and Shi, Wenbo and Shao, Xingyan and Zhang, Dongzhi},
title = {High-Sensitivity Flexible Strain Sensor Based on MWCNTs/HNTs Nanocomposites for Physiological and Handwriting Monitoring},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
doi = {10.1021/acsami.6c08945}
}
EUVIMED